Sökning: "device reliability performance"

Visar resultat 16 - 20 av 59 avhandlingar innehållade orden device reliability performance.

1. 16. Heterogeneous 3D Integration and Packaging Technologies for Nano-Electromechanical Systems

   Författare :Simon J. Bleiker; Frank Niklaus; Gary K. Fedder; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Nano-electromechanical systems NEMS ; Micro-electromechanical systems MEMS ; heterogeneous 3D integration; CMOS integration; Morethan- Moore MtM ; adhesive wafer bonding; NEM switch; FPGA; contact reliability; hermetic vacuum packaging; Cu low-temperature welding; through silicon vias TSVs ; magnetic self-assembly;

   Sammanfattning : Three-dimensional (3D) integration of micro- and nano-electromechanical systems (MEMS/NEMS) with integrated circuits (ICs) is an emerging technology that offers great advantages over conventional state-of-the-art microelectronics. MEMS and NEMS are most commonly employed as sensor and actuator components that enable a vast array of functionalities typically not attainable by conventional ICs. LÄS MER

3. 17. Silicon device substrate and channel characteristics influenced by interface properties

   Författare :Mikael Johansson; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; channel; attenuation; zro2; interface; traps; semi-insulating; high-k; mos; cross-talk; hfo2;

   Sammanfattning : This thesis is divided in two parts, one dealing with the depleted Si/Si structure, which is a substrate behaving as a semi-insulating material intended for radio-frequency applications and the other concerning high-k gate dielectrics (dielectrics with high dielectric constant) as the replacement for silicon dioxide as MOS gate dielectric.High frequency applications of CMOS integrated circuits, to lower cost, achieve higher performance and richer functionality, depends partly on the possibility to decrease the substrate coupling between different parts of the circuit. LÄS MER

4. 18. Germanium layer transfer and device fabrication for monolithic 3D integration

   Författare :Ahmad Abedin; Mikael Östling; Cor Claeys; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Monolithic; sequential; 3D; silicon; germanium; wafer bonding; etch back; germanium on insulator; GOI; Ge pFET; low temperature; Sipassivation; pn junction; Kisel; germanium; epitaxi; selektiv; pn-övergång; germanium påisolator; GOI; Ge PFET; bonding; monolitisk; sekventiell; tre dimensionell; 3D; lågtemperarad;

   Sammanfattning : Monolithic three-dimensional (M3D) integration, it has been proposed,can overcome the limitations of further circuits’ performance improvementand functionality expansion. The emergence of the internet of things (IoT) isdriving the semiconductor industry toward the fabrication of higher-performancecircuits with diverse functionality. LÄS MER

5. 19. Distributed Coded Caching with Application to Content Delivery in Wireless Networks

   Författare :Jesper Pedersen; Chalmers tekniska högskola; []
   Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; machine learning; erasure correcting codes; optimization; Caching; device-to-device communication; content delivery networks; time-to-live;

   Sammanfattning : The amount of content downloaded to mobile devices, mainly driven by the demand for video content, threatens to completely congest wireless networks and the trend of ever increasing video traffic is expected to continue unabated for many years. A promising solution to this problem is to store popular content closer to end users, effectively trading expensive bandwidth resources for affordable memory, a technique known as caching. LÄS MER

7. 20. Impact of water contamination and system design on wet clutch tribological performance

   Författare :Nowshir Fatima; Amaya Igartua; Luleå tekniska universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Maskinelement; Machine Elements;

   Sammanfattning : Wet clutches are lubricated machine components which utilize friction to transfer torque and thus establish connection between shafts rotating at different speeds. They are used in automatic transmission as shifting device or lockup clutch. LÄS MER