Sökning: "Structural timber"

Visar resultat 26 - 30 av 87 avhandlingar innehållade orden Structural timber.

1. 26. Stress-laminated-timber bridge decks subjected to ultimate loads

   Författare :Kristoffer K J Ekholm; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Ultimate-load tests; Stress-laminated timber; Timber bridges;

   Sammanfattning : Stress-laminated-timber (SLT) bridge decks are a satisfactory alternative to conventional short-span bridges in terms of cost and performance. SLT decks are made from several deck laminations positioned side by side. LÄS MER

3. 27. Architecturally Innovative Multi-Storey Timber Buildings : Methodology and Design

   Författare :Axel Kaiser; Andreas Falk; Luleå tekniska universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Träbyggnad; Timber Structures;

   Sammanfattning : This investigation applies architectural ideas of mass-customised difference and repetition, and tests them within the engineering paradigm of very tall timber buildings – taller than have ever been erected in the history of architecture. According to Edward Glaeser’s book, Triumph of the City, the cheapest way to deliver new housing (at least in the USA) is in theform of mass-produced two-storey homes, which typically cost only about $84 per square foot to erect. LÄS MER

4. 28. Mechanics of Cross-Laminated Timber

   Författare :Dietrich Buck; Olle Hagman; Dick Sandberg; Mats Ekevad; Mikael Sjödahl; Luleå tekniska universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; CLT assembly; CLT manufacture; Crosslam; DIC analysis; Digital speckle photography; Full-field mechanics; Laminated wood product; Mass timber engineering; Non-contact measurement; Non-destructive; Optical measurement; Panel configuration; Strain localization; X-lam; Alternativ byggmetod; Bildkorrelation; Hållbart byggande; KL- trä; Korslimmat trä; Skjuvtöjning; Massivträ; Träkonstruktion; Träteknik; Wood Science and Engineering;

   Sammanfattning : Increasing awareness of sustainable building materials has led to interest in enhancing the structural performance of engineered wood products. Wood is a sustainable, renewable material, and the increasing use of wood in construction contributes to its sustainability. LÄS MER

5. 29. Analysis of shear walls for multi-storey timber buildings

   Författare :Johan Vessby; Bo Källsner; Anders Olsson; Ulf Arne Girhammar; Roberto Crocetti; Linnéuniversitetet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; multi-storey structures; timber engineering; wind stabilization; shear walls; cross-laminated timber wall panels; fasteners; sheathing-to-framing connections; Building engineering; Byggnadsteknik; Byggteknik; Civil engineering;

   Sammanfattning : This doctoral thesis addresses questions of how wind loads acting on multistoreytimber buildings can be dealt with by structural design of such buildings.The conventional use of sheathing either nailed or screwed to a timberframework is considered, together with other stabilizing structures such ascross-laminated timber panels. LÄS MER

7. 30. Dynamic properties of two pedestrian timber bridges : Experimental and numerical analysis at several stages of construction

   Författare :Jens Bergenudd; Jean-Marc Battini; Roberto Crocetti; Patricia Hamm; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Dynamic analysis; Modal analysis; Pedestrian bridge; Timber; Railings; Asphalt; Slip modulus; Finite element modelling; Dynamisk analys; Modal analys; Gång- och cykelbro; Trä; Räcken; Asfalt; Förskjutningsmodul; Finita element modellering.; Bro- och stålbyggnad; Structural Engineering and Bridges;

   Sammanfattning : Pedestrian bridges can beneficially be made from timber in order for our society to reach a sustainable future. This positive development is partly made possible due to advances in engineered wood products (e.g. glued laminated timber) and the possibilities for pre-fabrication of structural parts. LÄS MER