Sökning: "Nuclear materials"
Visar resultat 21 - 25 av 258 avhandlingar innehållade orden Nuclear materials.
21. Investigation of microstructure and porosity of columnar yttria-stabilized zirconia coatings produced by axial suspension plasma spraying
Sammanfattning : Ceramic topcoats provide thermal barrier coatings (TBCs) with its heat insulating properties. The heat transfer is primarily occurring by conduction through the bulk material, therefore features such as interfaces, pores and grain boundaries are essential for thermal insulation as they act as scattering sites. LÄS MER
22. Investigation of Nuclear Materials with Positron Measurements
Sammanfattning : Positron Annihilation Lifetime Spectroscopy can be used to characterize radia- tion-induced material defects to subsequently optimize nuclear materials with respect to radiation damage. Nuclear Systems of the future such as Generation IV and fusion concepts demand high performance from structural materials, comprising a material's stability in highly-radiative and hot environments. LÄS MER
23. Internal Dosimetry in Nuclear Fuel Fabrication : Occupational Exposure to Uranium Aerosols
Sammanfattning : The production of nuclear fuel can be associated with occupational exposure to ionizing radiation from radioactive decay of uranium. Such exposure must be sufficiently low and radiation doses adequately determined. Radiation doses from internal exposure, i.e. LÄS MER
24. Mechanical Properties of Welds at Creep Activation Temperatures
Sammanfattning : Welds in materials intended for service at temperatures above the creep activation temperature often develop damage before the base metal. The weld is a discontinuity in the material and stresses and strains often accumulate in the weld. Knowledge of the properties of the weld is essential to the safe operation of the component containing the weld. LÄS MER
25. Molecular orientation in cellulose fibers and composites
Sammanfattning : The scope of this thesis is to quantitatively investigate the molecular orientation distribution of regenerated cellulose fibers and composites. The molecular orientation is known to affect macroscopic properties such as tensile strength of the fiber. LÄS MER