Sökning: "suspension plasma spraying"
Visar resultat 1 - 5 av 7 avhandlingar innehållade orden suspension plasma spraying.
1. Investigation of microstructure and porosity of columnar yttria-stabilized zirconia coatings produced by axial suspension plasma spraying
Sammanfattning : Ceramic topcoats provide thermal barrier coatings (TBCs) with its heat insulating properties. The heat transfer is primarily occurring by conduction through the bulk material, therefore features such as interfaces, pores and grain boundaries are essential for thermal insulation as they act as scattering sites. LÄS MER
2. Design of Suspension Plasma Sprayed Thermal Barrier Coatings
Sammanfattning : Thermal barrier coatings (TBCs) are widely used on gas turbine components to provide thermal insulation, which in combination with advanced cooling, can enable the gas turbine to operate at significantly higher temperatures even above the melting temperature of the metallic components. There is a permanent need,mainly due to environmental reasons, to increase the combustion temperature inturbines, hence new TBC solutions are needed. LÄS MER
3. Suspension plasma sprayed thermal barrier coatings for internal combustion engines
Sammanfattning : The upward trend in internal combustion engine efficiency is likely driven by the depletion of fossil fuels. Since no replacement in sight can deliver energy comparable to the conventional oil, there is a need to use it more rationally and effectively. LÄS MER
4. Microstructure and Thermal Conductivity of Liquid Feedstock Plasma Sprayed Thermal Barrier Coatings
Sammanfattning : Thermal barrier coating (TBC) systems are widely used on gas turbine components to provide thermal insulation and oxidation protection. TBCs, incombination with advanced cooling, can enable the gas turbine to operate at significantly higher temperatures even above the melting temperature of the metallic materials. LÄS MER
5. Design of Thermal Barrier Coatings
Sammanfattning : Thermal barrier coatings (TBC’s) are used to provide both thermal insulation and oxidation protection to high temperature components within gas turbines. The development of turbines for power generation and aviation has led to designs where the operation conditions exceed the upper limits of most conventional engineering materials. LÄS MER