Sökning: "Material fatigue"

Visar resultat 21 - 25 av 311 avhandlingar innehållade orden Material fatigue.

1. 21. Mechanical properties of semi-solid Al castings : Role of stirring

   Författare :Qing Zhang; Anders E.W. Jarfors; Stefan Jonsson; Tomas Liljenfors; Arne K. Dahle; Johan Ahlström; Jönköping University; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Rheometal™ process; aluminum alloys; stirring; segregation; porosity; oxides; ductility; fatigue performance; melt quality;

   Sammanfattning : Aluminum castings have been widely used in the automotive industry to reduce the vehicle's weight. However, the existence of casting defects significantly limits its application. The most common and detrimental defects in aluminum castings are porosity and oxides. LÄS MER

3. 22. Oxidation and corrosion fatigue aspects of cast exhaust manifolds

   Författare :Madeleine Ekström; Stefan Jonsson; Ulf Olofsson; Babette Tonn; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; cast exhaust manifolds; high-temperature corrosion; high-temperature low-cycle fatigue; high-temperature corrosion fatigue; ductile cast irons; cast stainless steel; Materials Science and Engineering; Teknisk materialvetenskap;

   Sammanfattning : Emission regulations for heavy-duty diesel engines are becoming increasingly restrictive to limit the environmental impacts of exhaust gases and particles. Increasing the specific power output of diesel engines would improve fuel efficiency and greatly reduce emissions, but these changes could lead to increased exhaust gas temperature, increasing demands on the exhaust manifold material. LÄS MER

4. 23. Continuous Welded Railway Rails: Residual Stress Analyses, Fatigue Assessments and Experiments

   Författare :Anders Skyttebol; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; microstructure; laser cladding; plasticity; rolling contact; computational welding mechanics; materials testing; flash butt welding; fatigue; railway rails; fatigue crack propagation; finite element method;

   Sammanfattning : Railway rails are today often continuously welded. This type of joint generally requires less maintenance than is needed for the bolted joints. It has also reduced wheel damage and made the ride more comfortable. However, these joints are subject to damage. LÄS MER

5. 24. Microstructure and mechanical properties of Ti-6Al-4V welds produced with different processes

   Författare :Sakari Tolvanen; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; fatigue; welding; porosity; microstructure; defects; Ti-6Al-4V;

   Sammanfattning : Titanium alloys are widely used for components in the fan and compressor sections of aeroengines mainly because of their superior strength-to-weight ratio. Large static compressor components can be manufactured by welding together smaller subcomponents, which has potential to provide benefits such as higher buy-to-fly ratio and improved performance of the components. LÄS MER

7. 25. Welding of Ti-6Al-4V: Influence of welding process and alloy composition on microstructure and properties

   Författare :Sakari Tolvanen; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; fatigue; microstructure; Ti-6Al-4V; porosity; welding; defects;

   Sammanfattning : Titanium alloys are widely used for components in the fan and compressor sections of aeroengines mainly because of their superior strength-to-weight ratio. Large static compressor components can be manufactured by welding together smaller subcomponents, which has potential to provide benefits such as higher buy-to-fly ratio and improved performance of the components. LÄS MER