Avancerad sökning
Visar resultat 1 - 5 av 129 avhandlingar som matchar ovanstående sökkriterier.
1. Performance Analysis and Optimal Design of Heat Exchangers and Heat Exchanger Networks
Sammanfattning : This thesis presents a study on performance analysis and optimal design of heat exchangers and heat exchanger networks. The study includes an experimental investigation of steam condensation in plate heat exchangers, optimal design of plate heat exchangers and plate-fin heat exchangers, and optimization of heat exchanger networks. LÄS MER
2. Corrosion testing of heat exchanger tubing
Sammanfattning : Heat exchanger tubes are commonly made from stainless steel.In a heat exchanger both the process fluid and the cooling orheating media can be corrosive. It is therefore important to beable to select materials that do not suffer from corrosion.Current methods in this area, however, suffer from limitationsand shortcomings. LÄS MER
3. Performance of Compact Heat Exchanger in Non-Perpendicular Cooling Airflows
Sammanfattning : During recent years the main focus in the vehicle industry has been on cutting the fuel consumption and emissions as well as improving the vehicle performance. To be able to meet these demands additional systems are being introduced into the vehicle. LÄS MER
4. Advances in Ventilation Heat Recovery : An assessment of peak loads shaving using renewables
Sammanfattning : The building sector accounts for approximately 40% of total global energy usage.In residential buildings located in cold climate countries, 30-60% of this energy isused for space heating, 20–30% is lost by discarded residential wastewater, and therest is devoted to ventilation heat loss. LÄS MER
5. Estimation of Thermal and Hydraulic Characteristics of Compact Brazed Plate Heat Exchangers
Sammanfattning : This thesis work presents various performance estimation methods of compact brazed plate heat exchangers (BPHE) operating in single phase, condenser, evaporator, cascaded and transcritical applications. Such methods play a vital role in development of heat exchanger selection software and during geometry parameter estimation in the new product development process. LÄS MER