Sökning: "Peak heat load shaving"

Hittade 3 avhandlingar innehållade orden Peak heat load shaving.

  1. 1. Advances in Ventilation Heat Recovery : An assessment of peak loads shaving using renewables

    Författare :Behrouz Nourozi; Sasan Sadrizadeh; Adnan Ploskic; Carey Simonson; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Peak heat load shaving; renewable energy; ventilation heat recovery; frosting in heat exchangers; Heat transfer; förnybar energi; ventilation värmeåtervinning; frosting i värmeväxlare; värmeöverföring; Byggvetenskap; Civil and Architectural Engineering;

    Sammanfattning : The building sector accounts for approximately 40% of total global energy usage.In residential buildings located in cold climate countries, 30-60% of this energy isused for space heating, 20–30% is lost by discarded residential wastewater, and therest is devoted to ventilation heat loss. LÄS MER

  3. 2. Self-Regulating Active Chilled Beams

    Författare :Peter J Filipsson; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Comfort cooling; High temperature cooling; Self-regulation; Active chilled beams;

    Sammanfattning : By designing comfort cooling systems to operate with higher chilled water temperatures, electricity driven chillers may be replaced by natural sources of free cooling. It also enables the possibility of self-regulation which, due to simplicity and robustness, brings cost-savings both during installation and maintenance of the building. LÄS MER

  4. 3. Design of Thermal Energy Storage with Phase Change Materials - Investigations within Material, Device and System Scale

    Författare :Pepe Tan; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; T-History; Phase Change Materials; Thermal Energy Storage; Experimentation;

    Sammanfattning : The addition of a thermal energy storage (TES) into a process allows the operator to store and release thermal energy on demand. This increased process flexibility leads to potential benefits such as shifting energy demand from peak to off-peak hours. LÄS MER