Sökning: "Disc refiners"
Hittade 5 avhandlingar innehållade orden Disc refiners.
1. Wood and fibre mechanics related to the thermomechanical pulping process
Sammanfattning : The main objective of this thesis was to improve the understanding of some aspects on wood and fibre mechanics related to conditions in the thermomechanical pulping process. Another objective was to measure the power distribution between the rotating plates in a refiner. LÄS MER
2. Improved energy efficiency in double disc chip refining
Sammanfattning : The electrical energy consumption in thermomechanical pulping (TMP) is very high, in the range of 2 – 3 MWh/adt depending on process solution and on the product quality specifications for the paper product. Both pulpwood and energy prices have increased rapidly for some time. LÄS MER
3. Measurement of shear force, temperature profiles and fibre development in mill-scale TMP refiners
Sammanfattning : Two different force sensors have been developed for tangential forcemeasurements in commercial TMP refiners, one is based on the use of piezoelectricsensors and the other on strain gauges. The measurements are used to learn moreabout the refining mechanism in both single-disc (SD) refiners and conical disc(CD) refiners. LÄS MER
4. Low consistency refining of mechanical pulp : process conditions and energy efficiency
Sammanfattning : The thesis is focussed on low consistency (LC) refining of mechanical pulp. Theresearch included evaluations of energy efficiency, development of pulpproperties, the influence of fibre concentration on LC refining and effects of rotorposition in a two-zoned LC refiner. LÄS MER
5. Distributions Of Fiber Characteristics As A Tool To Evaluate Mechanical Pulps
Sammanfattning : Mechanical pulps are used in paper products such as magazine or news grade printing papers or paperboard. Mechanical pulping gives a high yield; nearly everything in the tree except the bark is used in the paper. This means that mechanical pulping consumes much less wood than chemical pulping, especially to produce a unit area of printing surface. LÄS MER