Sökning: "300 MPA"
Visar resultat 1 - 5 av 18 avhandlingar innehållade orden 300 MPA.
1. Improving fatigue properties of welded high strength steels
Sammanfattning : In recent years a strong interest has been expressed to produce lighter structures.One possible solution to reduce the weight is to utilize high strength steels and use welding as the joining method. LÄS MER
2. Laser Welding and Additive Manufacturing of Duplex Stainless Steels : Properties and Microstructure Characterization
Sammanfattning : Duplex stainless steels (DSS), with a ferritic-austenitic microstructure, are used ina wide range of applications thanks to their high corrosion resistance and excellent mechanical properties. However, efficient and successful production and joining of DSS require precise control of processes and an in-depth understanding o frelations between composition, processing thermal cycles, resulting microstructures and properties. LÄS MER
3. Microstructure and mechanical properties of low-temperature hot isostatic pressed Ti-6Al-4V manufactured by electron beam melting
Sammanfattning : Ti-6Al-4V manufactured by electron beam melting Keywords: Additive manufacturing, high-temperature tensile properties, low cycle fatigue, neutron diffraction, fatigue crack growth ISBN: 978-91-89325-27-2 (Printed) 978-91-89325-26-5 (Electronic) Ti-6Al-4V is the most widely used α+β titanium alloy in aerospace engine applications due to its high specific strength. Typically, the alloy is manufactured as castings or forgings and then machined to final geometry. LÄS MER
4. Tableting performance of dry granulated particles : Significance and assessment of compression mechanical properties
Sammanfattning : Dry granulation (DG) is often utilized as an intermediate process during tablet manufacturing, for improving flow characteristics of the powder blend and/or reducing segregation issues related to the active pharmaceutical ingredient (API). The resulting granules exhibit typically irregular shapes with rough surfaces and their mechanical properties are related to the feeding powder and the process parameters used during the DG. LÄS MER
5. Droplet Velocities in a Liquid Spray
Sammanfattning : A method to look into a dense liquid spray has beenevaluated. The spray was mechanically sliced to remove theobscuring parts of it, thus gaining optical access to theinternal regions and thereby allowing for visualization ofpreviously unavailable parts of the spray. LÄS MER