Avancerad sökning

Visar resultat 1 - 5 av 433 avhandlingar som matchar ovanstående sökkriterier.

  1. 1. Powder degradation during powder bed fusion processing

    Författare :Ahmad Raza; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Laser-based powder bed fusion; Alloy 718; Powder degradation; Oxidation; Electron beam powder bed fusion; Additive manufacturing; AlSi10Mg; Residual oxygen; Spatter particles; Sublimation.;

    Sammanfattning : Powder bed fusion (PBF) techniques, including laser-based powder bed fusion (LB-PBF) and electron beam powder bed fusion (EB-PBF), are two rapidly growing additive manufacturing (AM) processes due to their ability to produce complex geometries in near-net shapes. To attain reproducibility and repeatability in PBF processes, a consistent set of powder properties is vital. LÄS MER

  3. 2. Additive Manufacturing using Alloy 718 Powder : Influence of Laser Metal Deposition Process Parameters on Microstructural Characteristics

    Författare :Andreas Segerstark; Joel Andersson; Lars-Erik Svensson; Robert Pedersen; Högskolan Väst; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Additive manufacturing; Laser metal deposition; powder; superalloy; Production Technology; Produktionsteknik; Manufacturing and materials engineering; Produktions- och materialteknik;

    Sammanfattning : Additive manufacturing (AM) is a general name used for production methodswhich have the capabilities of producing components directly from 3D computeraided design (CAD) data by adding material layer-by-layer until a final component is achieved. Included here are powder bed technologies, laminated object manufacturing and deposition technologies. LÄS MER

  4. 3. Spectral analysis in laser powder bed fusion

    Författare :Benedikt Brandau; Frank Brückner; Alexander Kaplan; Dan Roth-Fagaraseanu; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Spectral monitoring; Laser powder bed fusion; Laser optics; Absorbance; Produktionsutveckling; Manufacturing Systems Engineering;

    Sammanfattning : This thesis is about the investigation of the spectral interaction of electromagnetic radiation with metal powders. For this purpose, spectral data of powders for laser powder bed fusion processes are investigated in three papers using different techniques. LÄS MER

  5. 4. Nanopowder as sintering aid for water-atomized ferrous powder

    Författare :Swathi Kiranmayee Manchili; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; master sintering curve; dilatometry; reduction kinetics; thermal analysis; compaction; nanopowder; surface oxide; hydrogen; sintering; water-atomized iron powder; water-atomized steel powder;

    Sammanfattning : Press and sinter powder metallurgy steels are cost-effective solutions for structural applications. There is a constant drive for improvement in the density of these powder metallurgy steels to expand their usage in high-performance applications. LÄS MER

  7. 5. Biomaterial Components Prepared by Titanium Powder Technology

    Författare :Mikael Eriksson; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; dental; coping; biomaterial; titanium-hydroxyapatite composite; crown; cold isostatic pressing; deformation; titanium powder; high velocity compaction; powder metallurgy;

    Sammanfattning : The main objectives of this work were twofold: First, to determine if a pressed-powder method could be used to fabricate titanium dental copings, and to line out what problems or benefits this new method would have. Second, to test if high velocity compaction of titanium powder could be used to form biomaterial components such as copings or dental implants. LÄS MER