Sökning: "Electron beam powder bed fusion"

Visar resultat 1 - 5 av 20 avhandlingar innehållade orden Electron beam powder bed fusion.

1. 1. Powder degradation during powder bed fusion processing

   Författare :Ahmad Raza; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Laser-based powder bed fusion; Alloy 718; Powder degradation; Oxidation; Electron beam powder bed fusion; Additive manufacturing; AlSi10Mg; Residual oxygen; Spatter particles; Sublimation.;

   Sammanfattning : Powder bed fusion (PBF) techniques, including laser-based powder bed fusion (LB-PBF) and electron beam powder bed fusion (EB-PBF), are two rapidly growing additive manufacturing (AM) processes due to their ability to produce complex geometries in near-net shapes. To attain reproducibility and repeatability in PBF processes, a consistent set of powder properties is vital. LÄS MER

3. 2. Material Development for Electron Beam-based Powder Bed Fusion

   Författare :William Sjöström; Lars-Erik Rännar; Carlos Botero; Johan Moverare; Mittuniversitetet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Additive manufacturing; Electron beam; Powder bed fusion; EBM; PBF-EB; PBF-EB M; PBF-EB C; Process development; Material development; Ti-6Al-4V; 316L; V4E; Al2O3;

   Sammanfattning : Electron beam powder bed fusion (PBF-EB) is an additivemanufacturing (AM) method based on layer-by-layer melting of apowder bed. The technology is industrialized in certain applicationsbut still considered as immature and is not as widely used as laserbeam-based systems (PBF-LB). LÄS MER

4. 3. Aspects of building geometry and powder characteristics in powder bed fusion

   Författare :Alexander Leicht; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; direct metal laser sintering; stainless steel; powder recycling; thin wall structures; 316L; microstructure; electron beam melting; powder bed fusion; additive manufacturing;

   Sammanfattning : Additive manufacturing (AM) produces near-net-shaped parts directly from a 3D-CAD model in a layer-by-layer manner. One of the most common AM technique for fabricating metallic components is powder bed fusion (PBF). The PBF process has shown great potential in fabricating metallic parts with properties better or comparable to conventional methods. LÄS MER

5. 4. Electron beam powder bed fusion processing of stainless steels

   Författare :Stefan Roos; Lars-Erik Rännar; Andrei Koptioug; Carlos Alberto Botero Vega; Iain Todd; Mittuniversitetet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Additive manufacturing; Electron beam powder bed fusion; PBF-EB; Stainless steel; Mechanical properties; Micro-structure; Nanoindentation;

   Sammanfattning : Additive manufacturing (AM) is still a relatively new technology. In contrast to traditional machining where material is removed from a blank, AM is used to fuse a feedstock material into complex shapes, layer by layer, starting from an empty workspace. LÄS MER

7. 5. Powder degradation during powder bed fusion processing: impact of processing conditions and alloy composition

   Författare :Ahmad Raza; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; residual oxygen; powder bed fusion – electron beam; powder degradation; oxidation; Alloy 718; AlSi10Mg; powder bed fusion - laser beam; TiAl6V4; Hastelloy X.; sublimation; spatter particles; Keywords: additive manufacturing;

   Sammanfattning : In the recent decade, powder bed fusion (PBF) metal additive manufacturing (AM) has attracted huge attention both from the industry and the research community. This effort has helped mature PBF technology as a potential alternative to conventional manufacturing processes as casting, machining, forging, etc. LÄS MER