Sökning: "particle sintering"
Visar resultat 1 - 5 av 56 avhandlingar innehållade orden particle sintering.
1. Liquid phase sintering of W-Ni-Fe composites : liquid penetration, agglomerate separation and tungsten particle growth
Sammanfattning : The initial stage of liquid phase sintering, involving liquid penetration, agglomerate separation, particle spreading and growth has been investigated in experiments using tungsten heavy alloys. The particle composites used were produced by hot isostatic pressing (HIP) of pure powder mixtures of W-Ni-Fe-(Co). LÄS MER
2. Novel approaches for achieving full density powder metallurgy steels
Sammanfattning : Powder metallurgy (PM) is one of the most resource-efficient methods for manufacturing structural components with complex shapes. The utilisation of the metal powder to shape the components allows to minimise material waste and increase energy efficiency. LÄS MER
3. Surface Characteristics of Water Atomized Pre-alloyed Steel Powders and their effect on Sintering
Sammanfattning : Powder Metallurgy (PM) is an efficient method, in terms of cost and raw material utilization, for the production of structural parts that have strict dimensional tolerances and complex geometries. In the common processing route, steel powder is fabricated by water atomization and then pressed and sintered into the final component. LÄS MER
4. Surface Chemical Characteristics of Chromium-alloyed Steel Powder and the Role of Process Parameters during Sintering
Sammanfattning : Powder Metallurgy (PM) is a cost efficient method suitable for sustainable production of structural parts that have strict dimensional tolerances and complex geometries. It has been a common practice to utilize Ni and Cu as alloying elements in PM steels, but the high and fluctuating prices of Ni and the concerns around it associated with health hazards as well as the difficulty in recycling Cu lead the PM industry to search for effective alternatives such as Cr and Mn. LÄS MER
5. Studies of catalyst sintering during operating conditions
Sammanfattning : The damaging effect of pollutants from exhaust gas of combustion engines on the human health and the environment is well recognized. Since the 70s, the three-way catalytic converter (TWC) has substantially improved the urban air quality by simultaneous conversion of CO, NOx and unburned hydrocarbons to O2 , N2 , CO2 and H2O. LÄS MER