Sökning: "Powder metallurgy"

Visar resultat 1 - 5 av 131 avhandlingar innehållade orden Powder metallurgy.

1. 1. Powder degradation during powder bed fusion processing

   Författare :Ahmad Raza; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Laser-based powder bed fusion; Alloy 718; Powder degradation; Oxidation; Electron beam powder bed fusion; Additive manufacturing; AlSi10Mg; Residual oxygen; Spatter particles; Sublimation.;

   Sammanfattning : Powder bed fusion (PBF) techniques, including laser-based powder bed fusion (LB-PBF) and electron beam powder bed fusion (EB-PBF), are two rapidly growing additive manufacturing (AM) processes due to their ability to produce complex geometries in near-net shapes. To attain reproducibility and repeatability in PBF processes, a consistent set of powder properties is vital. LÄS MER

3. 2. The Effects of Morphology and Surface Oxidation of Stainless Steel Powder in Laser Based-Powder Bed Fusion

   Författare :Dmitri Riabov; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; additive manufacturing; powder surface; 316L stainless steel; oxides; oxidation; laser based-powder bed fusion; morphology; powder properties; powder production;

   Sammanfattning : Laser based-powder bed fusion (LB-PBF) is one of the many techniques within additive manufacturing (AM) that allows for near net shape manufacturing of metallic components. By using powder feedstock, it is possible to spread thin layers of powder and further selectively fuse powder in a repetitive manner until the component is completed. LÄS MER

4. 3. Novel approaches for achieving full density powder metallurgy steels

   Författare :Maheswaran Vattur Sundaram; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Cr- and Mo-alloyed PM steels; vacuum sintering; high density; full density; hot isostatic pressing.; cold isostatic pressing; liquid phase sintering; master alloy; double pressing-double sintering; powder metallurgy steels; sintering; water atomised powder;

   Sammanfattning : Powder metallurgy (PM) is one of the most resource-efficient methods for manufacturing structural components with complex shapes. The utilisation of the metal powder to shape the components allows to minimise material waste and increase energy efficiency. LÄS MER

5. 4. Alloy element redistribution during sintering of powder metallurgy steels

   Författare :Abdul Malik Tahir; Gustav Amberg; Jose Manuel Torralba; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Cu redistribution kinetics; diffusion; phase field modeling; powder metallurgy; swelling; liquid phase sintering; Teknisk materialvetenskap; Materials Science and Engineering; Engineering Mechanics; Teknisk mekanik;

   Sammanfattning : Homogenization of alloying elements is desired during sintering of powder metallurgy components. The redistribution processes such as penetration of liquid phase into the interparticle/grain boundaries of solid particles and subsequent solid-state  diffusion of alloy element(s) in the base powder, are important for the effective homogenization of alloy element(s) during liquid phase sintering of the mixed powders. LÄS MER

7. 5. Characteristics and Sintering of Fine Water-atomized and Carbonyl Iron Powder

   Författare :Johan Wendel; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; sintering; powder metallurgy; iron powder; dilatometry; surface analysis; thermal analysis;

   Sammanfattning : Various types of iron powder are extensively used in the powder metallurgy (PM) industry. Water-atomized iron powder is commonly used as the base in many low-alloyed steel products manufactured through the conventional 'press and sinter' route, while carbonyl iron powder is often used for metal injection moulded (MIM) components. LÄS MER