Sökning: "notch wear"

Visar resultat 1 - 5 av 10 avhandlingar innehållade orden notch wear.

  1. 1. Influence of Microstructure in Machining of Nickel and Nickel-Iron Based Alloys

    Författare :Stefan Olovsjö; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Wear mechanisms; Simulation; Tool wear; Burr; Meta-modelling; Inconel 718; Metal cutting; Superalloy; Waspaloy; Chip morphology; Notch wear; Alloy 718; JMatPro;

    Sammanfattning : Superalloys are used in applications such as turbines, steam power plants and nuclear power systems in components that require good high temperature properties and/or corrosion resistance. They are classified as difficult-to-cut materials and hence, from a sustainable production point of view, tool wear and tool life are major factors when machining these alloys. LÄS MER

  3. 2. Machinability variations in Alloy 718 —With focus on machining of turbine components

    Författare :Pajazit Avdovic; Industriell Produktion; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; polar diagram; flank wear; ceramic tool; variation in material; tool wear; tool life; machinability; Inconel; Alloy 718; Machining; notch wear;

    Sammanfattning : In gas turbine engine, nickel base alloy, such as Alloy 718, accounts for almost half of the total material requirement. Nickel-base superalloys are used for gas turbine components mainly because of their outstanding strength and resistance to oxidation at high temperatures (> 550°C). LÄS MER

  4. 3. Machinability variations in alloy 718 turbine components

    Författare :Pajazit Avdovic; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; variation in tool; hardness; Machining; flank wear; notch wear; alloy 718; grain size; instability; variation in material;

    Sammanfattning : Machinability Variations in Alloy 718 Turbine Components PAJAZIT AVDOVIC Department of Materials and Manufacturing TechnologyChalmers University of Technology AbstractAlloy 718 has a reputation for being very troublesome during the cutting process. It was suspected that this material was too hard and having too fine grain size and that these characteristics caused damage to cutting tools during processing. LÄS MER

  5. 4. Notchförslitning på whiskerarmerade keramiska skärvertyg

    Författare :Hans-Börje Oskarson; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; notch wear; wear mechanism; ceramic tool; machining;

    Sammanfattning : .... LÄS MER

  7. 5. Cryogenic Machining of Ti-6Al-4V

    Författare :Simon Isakson; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Cryogenic machining; Titanium; Surface integrity; Wear; Residual stress;

    Sammanfattning : The use of cryogenic coolants such as liquid nitrogen or liquid carbon dioxide has emerged as a sustainable alternative to conventional cutting fluids during machining operations, with the potential to increase tool life, leading to productivity gains, as well as to improve the surface integrity of the machined components. In addition, the machined surfaces are left residue-free after the process and there are no used cutting fluids to dispose of. LÄS MER