Sökning: "wear mechanism"

Visar resultat 1 - 5 av 83 avhandlingar innehållade orden wear mechanism.

  1. 1. On wear of wood-cutting tools : Tool materials, wear mechanisms and modelling

    Författare :Johan Nordström; []
    Nyckelord :Tool material; Wood cutting; Wear; Modelling;

    Sammanfattning : Bandsaw blades are commonly used in the sawmill industry for timber cutting. The saw teeth are gradually worn during cutting and will finally cause unacceptable surface roughness and dimensional deviations on the sawn wood product. Maintenance by re-sharpening of the saw teeth is therefore necessary after a certain time of sawing. LÄS MER

  2. 2. Lubrication mechanism of hydrocarbon-mimicking ionic liquids

    Författare :Erik Nyberg; Ichiro Minami; Luleå tekniska universitet; []
    Nyckelord :ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; P-SiSO; boundary film; silicate; friction; wear; anti-wear; friction modifier; base fluid; Maskinelement; Machine Elements;

    Sammanfattning : Lubrication is critical in order to achieve high efficiency and reliability of machine elements such as gears, bearings, and other moving mechanical assemblies (MMA). In space applications, tribological properties of lubricants are quickly growing more important. LÄS MER

  3. 3. A Ni3Al-alloy and its Composites as Potential Wear Resistant Materials for Advanced Applications

    Författare :Karin Anne Xia Gong; Chalmers University of Technology; []
    Nyckelord :Abrasive wear; Intermetallic matrix composite; Friction coefficient; Wear-resistant materials.; Nickel aluminide; Specific wear rate; Sliding wear;

    Sammanfattning : The Ni3Al-based intermetallic alloys as engineering materials in service, they may be subjected to a wear environment of some sort. Hence, it is technologically important to understand the tribological response and to determine methodologies to improve wear resistance of these advanced materials. LÄS MER

  4. 4. Wear mechanisms in sheet metal forming : Effects of tool microstructure, adhesion and temperature

    Författare :Anders Gåård; Pavel Krakhmalev; Jens Bergström; Ulf Olofsson; Karlstads universitet; []
    Nyckelord :ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; Galling; sheet metal forming; wear; friction; adhesion; temperature; Materialteknik; Materials Engineering;

    Sammanfattning : The general trend in the car body manufacturing industry is towards low-series production and reduction of press lubricants and car weight. The limited use of lubricants, in combination with the introduction of high and ultrahigh-strength sheet materials, continuously increases the demands on the forming tools. LÄS MER

  5. 5. A study on wear characteristics of high strength steels under sliding contact

    Författare :Abdulbaset Mussa; Pavel Krakhmalev; Jens Bergström; Jens Hardell; Karlstads universitet; []
    Nyckelord :ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; High strength steels; thread joint wear; punch wear; sliding wear; surface cracking; reciprocal sliding; fatigue; surface delamination; white etching layer; nano-structured layer; friction; Materialteknik; Materials Engineering;

    Sammanfattning : In the last decades, significant improvements regarding the design, materials and technology of rock drills have been made. Likewise, in sheet metal forming, forming tools experience very high contact pressures when processing high strength steel sheets. LÄS MER