Sökning: "metal oxides"

Visar resultat 6 - 10 av 319 avhandlingar innehållade orden metal oxides.

1. 6. Catalytic Properties of Protective Metal-Oxides

   Författare :Erik Hörnlund; KTH; []
   Nyckelord :isotopes; gas phase analysis; dissocation; isotopic exchange; high-temperature oxidation;

   Sammanfattning : .... LÄS MER

3. 7. Transport in Oxides Studied by Gas Phase Analysis

   Författare :Qian Dong; Gunnar Hultquist; W.J. Quadakkers; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Gas Phase Analysis; metal; oxide; platinum; vitreous silica; yttria stabilized zirconia; diatomic gas; oxidation; dissociation; permeation; uptake release.; Chemical engineering; Kemiteknik;

   Sammanfattning : The transport in oxides is studied by the use of gas phase analysis (GPA). An experimental method to identify transported species of gases and their contribution to the overall transport of gases in oxides and an experimental method to evaluate the parameters diffusivity, concentration, permeability of gases in oxides and effective pore size in oxides are developed, respectively. LÄS MER

4. 8. Welds in the lean duplex stainless steel LDX 2101 : effect of microstructure and weld oxides on corrosion properties

   Författare :Elin M. Westin; John Ågren; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Duplex stainless steel; welding; weld metal; HAZ; nitrogen; manganese; austenite formation; phase balance; precipitates; pitting resistance; heat input; solidification; element loss; evaporation; deposition; weld oxides; discoloration; mechanical properties; thermo-mechanical simulation; Geeble; GTA; laser; LOM; SEM; EDS; TEM; Leco; EPMA; ferroxyl test; XPS; post weld cleaning; pickling; Materials science; Teknisk materialvetenskap;

   Sammanfattning : Duplex stainless steels are a very attractive alternative to austenitic grades due to their higher strength and good corrosion performance. The austenitic grades can often be welded autogenously, while the duplex grades normally require addition of filler metal. LÄS MER

5. 9. Cold lap formation in Gas Metal Arc Welding of steel : An experimental study of micro-lack of fusion defects

   Författare :Peigang Li; Lars-Erik Svensson; Norbert Enzinger; Högskolan Väst; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Tandem GMAW; old laps; lack of fusion; Spatter; Overlap; Overflow; Manganese; Silicon; Oxides; Temperature; Manufacturing and materials engineering; Produktions- och materialteknik;

   Sammanfattning : Cold laps are defined as micro-lack of fusion defects at the weld toe more or less parallel to the surface of the parent plate. These defects are known to negatively influence the fatigue properties of weldments. Previous studies suggest that cold lap formation can not be avoided completely in Gas Metal Arc Welding (GMAW). LÄS MER

7. 10. Possibilities and Challenges of Using Combined Manganese Oxides as Oxygen Carriers

   Författare :Malin Hanning; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; carbon capture; combined oxides; manganese oxides; oxygen carriers; manganese ores; chemical-looping combustion;

   Sammanfattning : One alternative proposed to reduce greenhouse gas emissions is carbon capture and storage, where the carbon dioxide emitted from large point sources is captured, compressed and stored in underground geological formations. Many of the largest point sources of carbon dioxide are power plants and industries fuelled by fossil fuels or biomass. LÄS MER