Avancerad sökning
Visar resultat 1 - 5 av 11 avhandlingar som matchar ovanstående sökkriterier.
1. Fundamental Mathematical Modeling of Gas Injection in AOD Converters with Emphasis on the Inlet
Sammanfattning : The overall purpose of the present work has been to developa novel mathematical model of the gas injection in the AODconverter process, based on fundamental transport equations.The model development was divided into two major steps, wherethe first step involved modeling of gas injection through acylindrical nozzle at high gas flow rates (the nozzle model). LÄS MER
2. Modeling of fluid flow and heat transfer characteristics in AOD nozzles
Sammanfattning : .... LÄS MER
3. Some Aspects on Macroscopic Mixing in a Tundish
Sammanfattning : Two aspects on macroscopic mixing in a continuous flow system – metallurgical tundish were studied. Specifically, 1) the first focus was on salt solution tracer mixing, which is important for tundish design from perspectives of tracer technology and Residence Time Distributions (RTD) as well as for the understanding of the macroscopic mixing in tundishes. LÄS MER
4. Improved mapping of steel recycling from an industrial perspective
Sammanfattning : The results from this study show that it is possible to obtain data series on the steel scrap collection based on mass balance model on the crude steel production figures by steelmaking reactor type and additional knowledge on process metallurgy as well as information on inputs and outputs into the reactors with an area correlation coefficient of 0,91 compared to data obtained from trade statistics. Furthermore, the study shows that based on a new method it is possible to calculate the time duration of mass flows on a continuous basis. LÄS MER
5. Evaluation of Non-Metallic Inclusions after Deformation and Their Effect on the Machinability of Steel
Sammanfattning : The presence of non-metallic inclusions (NMIs) have critical effects on both the mechanical properties and machinability of steels. In the present thesis, one focus is to study the characteristics of deformed sulfides (MnS) for a stainless steel (3R65) and a tool steel (42CrMo4). LÄS MER