Sökning: "macroscopic mixing"

Visar resultat 1 - 5 av 19 avhandlingar innehållade orden macroscopic mixing.

1. 1. Some Aspects on Macroscopic Mixing in a Tundish

   Författare :Chao Chen; Anders Tilliander; Lage Jonsson; Pär Jönsson; Guoguang Cheng; Seppo Louhenkilpi; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; continuous reactor; tundish; tracer; macroscopic mixing; water model; CFD; turbulence models; inclusions removal; inclusions deposition; dynamic removal; Materials Science and Engineering; Teknisk materialvetenskap;

   Sammanfattning : Two aspects on macroscopic mixing in a continuous flow system – metallurgical tundish were studied. Specifically, 1) the first focus was on salt solution tracer mixing, which is important for tundish design from perspectives of tracer technology and Residence Time Distributions (RTD) as well as for the understanding of the macroscopic mixing in tundishes. LÄS MER

3. 2. Fluidized bed combustion - modeling and mixing

   Författare :David Pallarès; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Fluidized bed combustion; Mixing; Modeling;

   Sammanfattning : First demonstrated on industrial scale in 1976, fluidized bed combustion (FBC) rapidly became an established technology for solid fuel combustion with a currentinstalled capacity of about 30 GWe and power plants ranging from 10 to 460 MWe.The widespread use of the FBC technology both under so-called circulating and bubbling conditions (i.e. LÄS MER

4. 3. A Multi-Scale Approach To Adhesive Mixing

   Författare :Duy Nguyen; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Adhesive particle mixing; CFD simulation; multiscale; dry particle coating; regime map.; DEM simulation; dry powders for inhalation;

   Sammanfattning : Adhesive particle mixing is a fundamental process in many applications, especially in dry powders for inhalation. Despite its importance, a mechanistic process description for designing the structure of interest is still lacking. LÄS MER

5. 4. Macroscopic modeling of fluid dynamics in large-scale circultaing fluidized beds

   Författare :David Pallarès; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; fuel mixing; fluid dynamics; large-scale circulating fluidized bed; particle tracking;

   Sammanfattning : Satisfactory knowledge of the fluid dynamics governing the gas-solid flow in large-scaleCirculating Fluidized Bed (CFB) units is still lacking, although the CFB technology is widelyused for power (and heat) generation. Due to the complex two-phase flow in large CFB unitsfluid dynamical modeling of practical use is so far limited to a macroscopic approach andavailable models generally focus in describing one of the following key-phenomena: maingas-solid flow pattern, mixing of fuel particles and gas mixing. LÄS MER

7. 5. Fuel dispersion and bubble flow distribution in fluidized beds

   Författare :Johanna Olsson; Högskolan i Borås; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; fluidised bed; fuel mixing; bubble distribution; digital image analysis; particle tracking; Energi och material; Resource Recovery; Resursåtervinning;

   Sammanfattning : Fluidized bed technology is used for thermal conversion of solid fuels (combustion and gasification) and is especially suitable for conversion of low-rank fuels such as biomass and waste. The performance of fluidized bed units depends on the fuel mixing and fuel-gas contact. LÄS MER