Sökning: "Tool material"

Visar resultat 6 - 10 av 1070 avhandlingar innehållade orden Tool material.

  1. 6. Machinability variations in Alloy 718 —With focus on machining of turbine components

    Författare :Pajazit Avdovic; Industriell Produktion; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; polar diagram; flank wear; ceramic tool; variation in material; tool wear; tool life; machinability; Inconel; Alloy 718; Machining; notch wear;

    Sammanfattning : In gas turbine engine, nickel base alloy, such as Alloy 718, accounts for almost half of the total material requirement. Nickel-base superalloys are used for gas turbine components mainly because of their outstanding strength and resistance to oxidation at high temperatures (> 550°C). LÄS MER

  3. 7. On wear of wood-cutting tools : Tool materials, wear mechanisms and modelling

    Författare :Johan Nordström; []
    Nyckelord :Tool material; Wood cutting; Wear; Modelling;

    Sammanfattning : Bandsaw blades are commonly used in the sawmill industry for timber cutting. The saw teeth are gradually worn during cutting and will finally cause unacceptable surface roughness and dimensional deviations on the sawn wood product. Maintenance by re-sharpening of the saw teeth is therefore necessary after a certain time of sawing. LÄS MER

  4. 8. Toughness of Tool Steel

    Författare :Henrik Jesperson; Håkan Engqvist; Birger Karlsson; Uppsala universitet; []
    Nyckelord :Toughness; Tool Steel; Heat Treatment; Temperature; Energy absorption; Impact Testing; Fracture Toughness Testing; Non-metallic Inclusions; Carbides; Nitrides; Statistics; TECHNOLOGY; TEKNIKVETENSKAP; Teknisk fysik med inriktning mot materialvetenskap; Engineering Science with specialization in Materials Science;

    Sammanfattning : Toughness is the ability to resist tensile stresses in the presence of a notch or crack. Sometimes gross cracking of industrial tools, mould or dies, occurs due to insufficient toughness. As the economic consequences of the gross cracking are serious, the toughness of industrial tool material, generally tool steel, is of paramount importance. LÄS MER

  5. 9. Influence of microstructure on fatigue and ductility properties of tool steels

    Författare :Mats Randelius; Rolf Sandström; Jens Bergström; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Tool steels; fatigue; ductility; carbides; carbide cluster; inclusion; size distribution; modelling; FEM; Metallurgical process engineering; Metallurgisk processteknik;

    Sammanfattning : Fatigue and ductility properties in various tool steels, produced by powder metallurgy, spray forming or conventionally ingot casting, have been analysed experimentally and successfully compared to developed models. The models are able to predict the fatigue limit and cause for fatigue fracture, and strain- and stress-development until fracture during the ductile fracture process respectively. LÄS MER

  7. 10. Mechanical Properties, Microstructures and Defects of Tool Steels Fabricated by Additive Manufacturing

    Författare :Yuan Miwen; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Additive manufacturing; Carbides; Post heat treatment; Directed energy deposition; Softening resistance; Pores; Laser beam powder bed fusion; Solidification cracking; Tool steels;

    Sammanfattning : Additive Manufacturing (AM) has been gaining significant interest in the manufacturing of metallic materials in the recent years. From a techno-commercial standpoint, tooling is one of the areas with low production volumes but very high demands on part performance and complexity in design, all of which are characteristic for metal AM. LÄS MER