Sökning: "Pores"
Visar resultat 1 - 5 av 390 avhandlingar innehållade ordet Pores.
1. Mechanical Properties, Microstructures and Defects of Tool Steels Fabricated by Additive Manufacturing
Sammanfattning : Additive Manufacturing (AM) has been gaining significant interest in the manufacturing of metallic materials in the recent years. From a techno-commercial standpoint, tooling is one of the areas with low production volumes but very high demands on part performance and complexity in design, all of which are characteristic for metal AM. LÄS MER
2. Pores, inclusions and electromagnetic stirring : Topics from the continuous casting of steel
Sammanfattning : This thesis deals with two topics of relevance to the continuous casting of steel,in view of their importance as regards the quality of the final solidified structure.The first concerns the precipitation of gas pores and inclusions in the interden-dritic region of the solidifying metal. LÄS MER
3. Manufacturihng of heavy rings and large copper canisters by plastic deformation
Sammanfattning : Plastic deformation processes transform material fromas-received state to products meeting certain requirements inproperties, microstructure and shape. To achieve thistransformation, the relationship between material response andprocess conditions should be understood. LÄS MER
4. Detection and classification of internal flaws in laser powder bed fusion: application of in-situ monitoring for quality control of Hastelloy X builds
Sammanfattning : Additive manufacturing technologies, in particular laser powder bed fusion (LPBF), have received much attention in recent years due to their multiple advantages over traditional manufacturing. Yet, the usage of additively manufactured products is still quite limited, mainly due to two factors: the low repeatability, which is particularly relevant for applications where high performance is required from the materials, and the typically low productivity, particularly relevant for products with a substantial production volume. LÄS MER
5. In-situ monitoring of laser powder bed fusion applied to defect detection
Sammanfattning : Additive manufacturing technologies, particularly laser powder bed fusion (LPBF), have received much attention recently due to their numerous advantages over conventional manufacturing methods. However, the use of LPBF is still quite restricted, mainly due to two factors: its typically low productivity, which makes the technology less competitive in applications with moderate to high production volumes, and its limited reliability, particularly relevant for applications where high performance is required from the materials. LÄS MER