Sökning: "Tool Steel"
Visar resultat 1 - 5 av 159 avhandlingar innehållade orden Tool Steel.
- Detta är en avhandling från Karlstad : Karlstad University
Sammanfattning : Large improvements in cutting tool design and technology, including the application of advanced surface engineering treatments on the cemented carbide insert, have been achieved in the last decades to enhance tool performance. However, the problem of improving the tool body material is not adequately studied. LÄS MER
- Detta är en avhandling från Uppsala : Institutionen för teknikvetenskaper
Sammanfattning : Toughness is the ability to resist tensile stresses in the presence of a notch or crack. Sometimes gross cracking of industrial tools, mould or dies, occurs due to insufficient toughness. As the economic consequences of the gross cracking are serious, the toughness of industrial tool material, generally tool steel, is of paramount importance. LÄS MER
- Detta är en avhandling från Göteborg : Chalmers University of Technology
Sammanfattning : The manufacturing of plastic components, like a majority of other mass produced discrete parts, require well designed dies and moulds. Complex geometries and increasing demands on final surface appearance, which is strongly connected to the quality impression, are pushing for high demands on mould-makers and polishers as well as steel producers. LÄS MER
- Detta är en avhandling från Karlstad : Karlstads universitet
Sammanfattning : In sheet metal forming (SMF) of materials such as stainless steels there is a major problem with transfer and accumulation of sheet material to the metal forming tool surface. The problem is known as galling; a sort of severe adhesive wear, which results in severe scratching of produced parts. LÄS MER
- Detta är en avhandling från Stockholm : KTH
Sammanfattning : The thesis is based on two supplements with two major objectives. In the first supplement equilibrium top slag-steel bulk and inclusions-steel bulk were investigated by comparison between calculated and measured oxygen activity values. This was done by applying different oxide activity models for slags combined with thermodynamic calculations. LÄS MER