Sökning: "Wood cutting"
Visar resultat 1 - 5 av 30 avhandlingar innehållade orden Wood cutting.
Sammanfattning : Bandsaw blades are commonly used in the sawmill industry for timber cutting. The saw teeth are gradually worn during cutting and will finally cause unacceptable surface roughness and dimensional deviations on the sawn wood product. Maintenance by re-sharpening of the saw teeth is therefore necessary after a certain time of sawing. LÄS MER
Sammanfattning : Cutting processes, in general, and wood cutting processes, in particular, are complex to explain and describe with many influencing factors. Wood, in contrast to man-made fabricated materials, is not a homogenous and distinct material, but a multifaceted and nonhomogeneous biological material. LÄS MER
Sammanfattning : Machining using circular tools is very frequent in the wood manufacturing industry. Such machinery is very efficient but also leads to problems, for example in the indoor factory environment, in the form of unhealthy wood dust emissions. Another example is imperfections in wood products such as unacceptable surface quality. LÄS MER
4. On the wood chipping process : a study on basic mechanisms in order to optimize chip properties for pulping
Sammanfattning : In both the chemical and mechanical pulping process, the logs are cut into wood chips by a disc chipper before fibre separation. To make the wood chipping process more efficient, one have to investigate in detail the coupling between process parameters and the quality of the chips. LÄS MER
Sammanfattning : About half the total volume of sawlogs end up as sawn timber. The rest is lostdue to drying shrinkage or is turned into byproducts like wood chips, sawdustand shavings. As the raw material is a large expense for a sawmill, it is important to fully utilize the logs. LÄS MER