Sökning: "Thermal cure"
Visar resultat 11 - 15 av 15 avhandlingar innehållade orden Thermal cure.
11. Variables affecting stress development and resin conversion in light-cured dental composites
Sammanfattning : The general aim of this dissertation was to identify and investigate factors that can be used to minimize stress development in light cured dental resins without compromising the conversion level of the polymer. Modulus of elasticity, polymerization contraction strain, degree of conversion and shrinkage of light-cure dental composites were determined after curing with three different light power densities where total irradiated energy (J/cm2) kept constant. LÄS MER
12. Numerical stress analysis in hybrid adhesive joint with non-linear materials
Sammanfattning : This thesis presents systematic numerical study of stresses in the adhesive of a single-lap joint subjected to various loading scenarios (mechanical and thermal loading). The main objective of this work is to improve understanding of the main material and geometrical parameters determining performance of adhesive joint for the future analysis of failure initiation and development in these structures. LÄS MER
13. Exploring fatty acid derivatives from renewable resources as raw materials for coating applications
Sammanfattning : In the work presented herein, epoxy fatty acid derivatives were explored in the formation of thermosets for coating applications. The epoxy fatty acid derivatives were obtained from renewable resources such as birch tree bark and epoxidized linseed oil. LÄS MER
14. Minimal conization with carbon dioxide laser for treatment of cervical intra-epithelial neoplasia
Sammanfattning : 3,100 non-pregnant women and 85 pregnants were miniconized during the 15-year period ending 1994 . The outpatient procedure of minimal conization using a freehand-guided, high power 60W carbon dioxide laser focused to 0.1 mm in spot-size, giving high power density 165,000 W/cm2, produces single-piece tissue specimens for histological examination. LÄS MER
15. Ultra Thick Laminates for Compact Load Introduction Fittings
Sammanfattning : Composites are increasingly often used for thick and compact structures with the clear aim to reduce the overall weight and cost of an aircraft. But classic applications of composites are thinner structures with limited out of plane loads. LÄS MER