Sökning: "Surface roughness"

Visar resultat 36 - 40 av 437 avhandlingar innehållade orden Surface roughness.

  1. 36. Polishability of tool steels : Characterisation of high gloss polished tool steels

    Författare :Sabina Rebeggiani; Olaf Dambon; Högskolan i Halmstad; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; tool steels; surface characterisation; polishability; 3D parameters; high gloss polishing; Surface engineering; Ytbehandlingsteknik;

    Sammanfattning : The manufacturing of plastic components, like a majority of other mass produced discrete parts, require well designed dies and moulds. Complex geometries and increasing demands on final surface appearance, which is strongly connected to the quality impression, are pushing for high demands on mould-makers and polishers as well as steel producers. LÄS MER

  3. 37. Reduction of heat transfer and heat load in internal combustion engines

    Författare :Joop Somhorst; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; efficiency; TBC; thermal barrier coating; surface roughness; engine; heat transfer; emissions; alumina; zirconia;

    Sammanfattning : Thermal insulation of the combustion chamber in an engine has great potential to reduce fuel consumption and CO2 emissions. Research on thermal barrier coatings (TBC) has been performed since the early eighties to address this potential. LÄS MER

  4. 38. Tribology of stamping : the influence of designed steel sheet surface topography on friction

    Författare :Daniel Wiklund; Högskolan i Halmstad; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; steel sheet; tribology; surface topography; Metallurgical process and manufacturing engineering; Metallurgisk process- och produktionsteknik;

    Sammanfattning : Tribology is the science of friction, wear, and lubrication; the interaction of surfaces in relative motion. The tribological conditions in sheet metal forming influences the flow of material in forming operations, the strain distributions of sheet material, extent of wear, and thereby the quality of products. LÄS MER

  5. 39. The influence of surface microroughness on wafer bonding

    Författare :Mats Bergh; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; AFM; hydrophilic; surface roughness; diamond; silicon-on-insulator; poly silicon; silicon-on-diamons; atomic force microscope; wafer bonding; SOI; aluminum nitride; hydrophobic;

    Sammanfattning : .... LÄS MER

  7. 40. SURFACE PROPERTIES OF IMPLANTS MANUFACTURED USING ELECTRON BEAM MELTING

    Författare :Rebecca Klingvall Ek; Lars-Erik Rännar; Mikael Bäckström; Jaan Hong; Felicia Suska; Mittuniversitetet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; electron beam melting; blood coagulation; bone ingrowth; surface roughness; process parameters;

    Sammanfattning : This thesis summarizes the results concerning the manufacture of medical implants for bone replacement using electron beam melting (EBM) which is an additive manufacturing (AM) technology, and aims to satisfy the engineering needs for the medical functionality of manufacturing technology. This thesis has focused on some microscopic properties for surfaces and bone integration. LÄS MER