Sökning: "Plastic yield"

Visar resultat 1 - 5 av 108 avhandlingar innehållade orden Plastic yield.

1. 1. Torque and angle controlled tightening over the yield point of a screw

   Författare :Göran Toth; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; clevis; permanent elongation factor; Monte-Carlo simulations; bolted screwed joints; final preload; torque and angle controlled tightening; extreme-value method; plastic deformation; Taylor s series expansions; plastic spring constant of the screw; yield; elastic angle; momentary elongation factor; snug torque; torque controlled tightening; final torque; turn-of-nut method;

   Sammanfattning : .... LÄS MER

3. 2. Torque and Angle Controlled Tightening of Bolted Joints

   Författare :Göran Toth; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; torque controlled tightening; deformation parameters; momentary elongation; deformation factor; torque; Bolted screwed joints; spring characteristic; Torx; torque and angle controlled tightening; hexalobular; final torque; snug torque; Taylor’s series expansions; preload; plastic deformation; permanent elongation; yield; friction diameter; plastic spring constant; clevis; turn-of-nut method; bearing surface pressure; twisting; Monte-Carlo simulations;

   Sammanfattning : Reduced weight and fuel consumption, improved reliability and engine performance are the main requirements in the automotive industry of today. These requirements demand robust and optimized bolted joints, where a high amount of preload obtained by effective utilisation of the bolt is essential. LÄS MER

4. 3. Plastic Deformation of Duplex Stainless Steel

   Författare :Magnus Nyström; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; stainless steel; microstructure; plastic zones; impact toughness; anisotropy; prestraining; annealing; fractography; fatigue;

   Sammanfattning : Duplex austenitic/ferritic stainless steels are increasingly used as an alternative to conventional austenitic grades. Main advantages of the duplex grades are good resistance to corrosion cracking and corrosion fatigue in environments that contain chloride. LÄS MER

5. 4. Plastic behaviour of steel : experimental investigation and modelling

   Författare :Jonas Gozzi; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Steel Structures; Stålbyggnad;

   Sammanfattning : This thesis deals with the plastic behaviour of steel. It comprises an investigation with focus on biaxial tests and constitutive modelling. Tests were performed on one stainless steel grade in two different strength classes, C700 and C850, as well as one extra high strength structural steel grade. LÄS MER

7. 5. Discrete element simulation of elasto-plastic shock waves in high-velocity compaction

   Författare :Muhammad Shoaib; Leaf Kari; Bruska Azhdar; Wim Desmet; KTH; []
   Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; High-velocity compaction; Discrete element method; Plastic deformaiton; dynaimic loading; elasto-plastic shock wave; Friction; Adhesion; Physics; Fysik; Järnvägsgruppen - Ljud och vibrationer; Järnvägsgruppen - Ljud och vibrationer;

   Sammanfattning : Elasto-plastic shock waves in high-velocity compaction of spherical metal particles are the focus of this thesis which consists of four papers (A-D). The compaction process is modeled by a discrete element method while using elastic and plastic loading, elastic unloading and adhesion at contacts. LÄS MER