Sökning: "deformation parameters"
Visar resultat 1 - 5 av 302 avhandlingar innehållade orden deformation parameters.
1. Influence of aggregates on permanent deformation of asphalt
Sammanfattning : One of the most common failure modes for asphalt pavements is the occurrence of permanent deformation on the wheel path. This leads to not only other distresses, such as potholes and stripping, but also decreases substantially road safety and increases maintenance costs. LÄS MER
2. Torque and Angle Controlled Tightening of Bolted Joints
Sammanfattning : Reduced weight and fuel consumption, improved reliability and engine performance are the main requirements in the automotive industry of today. These requirements demand robust and optimized bolted joints, where a high amount of preload obtained by effective utilisation of the bolt is essential. LÄS MER
3. Undifferenced GPS for Deformation Monitoring
Sammanfattning : This thesis contains the development of a deformation monitoring software based on undifferenced GPS observations. Software like this can be used in alarm systems placed in areas where the earth is unstable. LÄS MER
4. Generalised stacking fault energy and plastic deformation of austenitic stainless steels
Sammanfattning : Austenitic stainless steels are primarily known for their exceptional corrosion resistance. They have the face centred cubic (FCC) structure which is stabilised by adding nickel to the Fe-Cr alloy. The Fe-Cr-Ni system can be further extended by adding other elements such as Mn, Mo, N, C, etc. in order to improve the properties. LÄS MER
5. Modeling internal deformation of salt structures targeted for radioactive waste disposal
Sammanfattning : This thesis uses results of systematic numerical models to argue that externally inactive salt structures, which are potential targets for radioactive waste disposal, might be internally active due to the presence of dense layers or blocks within a salt layer.The three papers that support this thesis use the Gorleben salt diapir (NW Germany), which was targeted as a future final repository for high-grade radioactive waste, as a general guideline. LÄS MER