Sökning: "Micromechanics"

Visar resultat 1 - 5 av 34 avhandlingar innehållade ordet Micromechanics.

  1. 1. Micromechanics : fabrication processes and fluid components

    Författare :Ulf Lindberg; Uppsala universitet; []
    Nyckelord :NATURAL SCIENCES; NATURVETENSKAP;

    Sammanfattning : .... LÄS MER

  2. 2. Gallium arsenide micromechanics

    Författare :Klas Hjort; Uppsala universitet; []
    Nyckelord :NATURAL SCIENCES; NATURVETENSKAP;

    Sammanfattning : .... LÄS MER

  3. 3. InP based Micromechanics for Vertical-Cavity Micro-Opto-Electro-Mechanical Systems

    Författare :Martin Strassner; KTH; []
    Nyckelord :MOEMS; vertical-cavity; InP; DBR; epitaxy; semiconductor processing; micromechanics; wavelength tunable devices; long-wavelength;

    Sammanfattning : During the past decade, the amount of transmitted data hasbeen boosted due to an increasing use of the World Wide Web(WWW), video and audio transmissions. In the late 90s, thetraditional technology using twisted copper cables was nolonger capable to provide enough transmission capacity for theconstantly increasing data traffic. LÄS MER

  4. 4. Micromechanics of Fiber Networks

    Författare :Svetlana Borodulina; Artem Kulachenko; Sören Östlund; Mikael Nygårds; Pierre J.J. Dumont; KTH; []
    Nyckelord :ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Network simulation; Mechanical properties; Fibers; Fiber-to-fiber bonds; Free fiber length; Number of contacts; Contact density; Paper properties; X-ray microtomography; Solid Mechanics; Hållfasthetslära;

    Sammanfattning : The current trends in papermaking involve, but are not limited to, maintaining the dry strength of paper material at a reduced cost. Since any small changes in the process affect several factors at once, it is difficult to relate the exact impact of these changes promptly. LÄS MER

  5. 5. Micromechanics of Powder Compaction

    Författare :Erik Olsson; Per-Lennart Larsson; Christophe Martin; KTH; []
    Nyckelord :Solid Mechanics; Hållfasthetslära;

    Sammanfattning : Compaction of powders followed by sintering is a convenient manufacturing method for products of complex shape and components of materials that are difficult to produce using conventional metallurgy. During the compaction and the handling of the unsintered compact, defects can develop which could remain in the final sintered product. LÄS MER