Sökning: "Decarburization"

Visar resultat 1 - 5 av 22 avhandlingar innehållade ordet Decarburization.

  1. 1. A study on the Submerged Entry Nozzels (SEN) respecting clogging and decarburization

    Författare :Arashk Memarpour; Pär Jönsson; Sune Jansson; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Refractory; SEN; Clogging; REM; Coating; glaze; alkaline; Refractory; ZrSi2; Graphite; Alumina; Oxidation; Al2O3-C; ZrO2-C; MgO-C; decarburization; reaction mechanism; Materials science; Teknisk materialvetenskap;

    Sammanfattning : The submerged entry nozzle (SEN) has been used to transport the molten steel from tundish to the mould. The main purpose of the SEN usage is both to prevent oxygen and nitrogen pick-up by molten steel and to achieve the desired flow condition in the mould. LÄS MER

  3. 2. An Experimental Study of Submerged Entry Nozzles (SEN) Focusing on Decarburization and Clogging

    Författare :Arashk Memarpour; Pär Jönsson; Torbjörn Carlberg; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Refractory; SEN; Clogging; REM; Coating; glaze; alkaline; Post- Mortem; industrial preheating; ZrSi2; Graphite; Alumina; Oxidation; Al2O3-C; ZrO2-C; MgO-C; decarburization; reaction mechanism; Yttria Stabilized Zirconia; plasma spray-PVD coating;

    Sammanfattning : The submerged entry nozzle (SEN) is used to transport the molten steel from a tundish to a mould. The main purpose of its usage is to prevent oxygen and nitrogen pick-up by molten steel from the gas. Furthermore, to achieve the desired flow conditions in the mould. LÄS MER

  4. 3. A Study of Parameters that Influence the Kinetics of the AOD Decarburisation Process

    Författare :Patrik Ternstedt; Anders Tilliander; Ville-Valteri Visuri; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; AOD; decarburization; steel; slags; composition; petrography; physical modeling; industrial plant trials; AOD; avkolning; stål; slagg; sammansättning; petrografi; fysikalisk modellering; industriella försök; Teknisk materialvetenskap; Materials Science and Engineering; Metallurgical process science; Metallurgisk processvetenskap;

    Sammanfattning : This thesis focuses on the AOD process, which is an important metallurgical reactor in stainless steel production. To be more specific, the thesis is limited to study the decarburisation step, which is the first of three process steps in the AOD converter. LÄS MER

  5. 4. An Experimental Study to Improve the Casting Performance of Steel Grades Sensitive for Clogging

    Författare :Jennie Svensson; Pär Jönsson; Voicu Brabie; Lauri Holappa; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Preheating; Decarburization; RBM; Clogging; SEN; Plasma sprayed coating; CaTiO3; YSZ; Continuous casting; Pilot plant trials; Industrial plant trials; Clean steel; Tundish; Non-metallic inclusions; MISS; Materials Science and Engineering; Teknisk materialvetenskap; Steel Forming and Surface Engineering;

    Sammanfattning : In this study, the goal is to optimize the process and to reduce the clogging tendency during the continuous casting process. The focus is on clogging when the refractory base material (RBM) in the SEN is in contact with the liquid steel. LÄS MER

  7. 5. Modeling of Gas Flows in Steelmaking Decarburization Processes

    Författare :Zhili Jack Song; Pär Jönsson; Seppo Louhenkilpi; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; VOD; nozzle; jet; vacuum; BOF; LD; AOD; post combustion; flue; CFD;

    Sammanfattning : The purpose of the current study is to increase the understanding of different steelmaking processes at the decarburization stages by use of mathematical modeling. More specifically, two De-Laval nozzles from a VOD (Vaccum Oxygen Decarburization) process, which is used for producing stainless steels with ultra-low carbon grades, was investigated for different vessel pressures. LÄS MER