Sökning: "Preheating"
Visar resultat 1 - 5 av 36 avhandlingar innehållade ordet Preheating.
1. An Experimental Study to Improve the Casting Performance of Steel Grades Sensitive for Clogging
Sammanfattning : In this study, the goal is to optimize the process and to reduce the clogging tendency during the continuous casting process. The focus is on clogging when the refractory base material (RBM) in the SEN is in contact with the liquid steel. LÄS MER
2. Preheating of ambient air by a system of earth tubes as a heat source for buildings
Sammanfattning : .... LÄS MER
3. An Experimental Study of Submerged Entry Nozzles (SEN) Focusing on Decarburization and Clogging
Sammanfattning : The submerged entry nozzle (SEN) is used to transport the molten steel from a tundish to a mould. The main purpose of its usage is to prevent oxygen and nitrogen pick-up by molten steel from the gas. Furthermore, to achieve the desired flow conditions in the mould. LÄS MER
4. The Submerged Entry Nozzle : A Study of how to Reduce Decarburization and Clogging
Sammanfattning : During continuous casting the submerged entry nozzle (SEN) is one of the critical points. This since sequence casting is favourable, clogging of the SEN results in fever sequences or aborted castings. In this study the preheating of SEN has been evaluated at different steel plants. LÄS MER
5. Sustainable building ventilation solutions with heat recovery from waste heat
Sammanfattning : The energy used by building sector accounts for approximately 40% of the total energy usage. In residential buildings, 30-60% of this energy is used for space heating which is mainly wasted by transmission heat losses. A share of 20-30% is lost by the discarded residential wastewater and the rest is devoted to ventilation heat loss. LÄS MER