Sökning: "thermo-mechanical analysis"

Visar resultat 1 - 5 av 33 avhandlingar innehållade orden thermo-mechanical analysis.

  1. 1. Thermo-mechanical Fatigue Crack Propagation in Inconel 718

    Författare :Lars Jacobsson; Materialteknik; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; crack closure; image analysis; potential drop; in-situ scanning elecron microscopy; crack propagation experiments; Thermo-mechanical fatigue; Inconel 718;

    Sammanfattning : Thermo-mechanical fatigue crack propagation in Inconel 718 has been studied with different methods. In-situ observations with a scanning electron microscope (SEM) were performed, the crack propagation process was followed cycle by cycle and the influences from load, temperature, and microstructure on the crack growth were analyzed. LÄS MER

  3. 2. Methods for modelling and analysis of thermo-mechanical manufacturing processes

    Författare :Greger Bergman; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Datorstödd maskinkonstruktion; Computer Aided Design;

    Sammanfattning : .... LÄS MER

  4. 3. Thermo-mechanical Assessment of Reactor Pressure Vessels of Light Water Reactors During Severe Accidents

    Författare :Hongdi Wang; Walter Villanueva; Sevostian Bechta; Weimin Ma; Artem Kulachenko; Michael Fitzpatrick; KTH; []
    Nyckelord :Severe accident scenario; reactor pressure vessel; in-vessel melt retention; failure analysis; finite element analysis; validations; Scenario för svåra haverier; reaktortank; in-vessel retention; feleffektsanalys; Finite Element Analyser; validering; Physics; Fysik;

    Sammanfattning : The reactor pressure vessel (RPV) is one of the crucial safety barriers designed to isolate the reactor core, safeguarding against potential radioactive releases into the environment during a severe accident. The assessment of RPV behaviour and its failure is necessary to predict the characteristics of melt release into the reactor pit and succeeding ex-vessel accident progression. LÄS MER

  5. 4. Thermo-Mechanical Behaviour of Refrigerated Caverns in Hard Rock

    Författare :Rune Glamheden; Chalmers tekniska högskola; []
    Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; thermal deformation; rock caverns; igneous rocks; thermal properties; underground storage; low temperatures; refrigeration; thermal strain;

    Sammanfattning : For almost 4 decades, underground caverns in hard rock have been used to store liquefied petroleum gases (LPG) and refrigerated products, such as foods and chemicals. The design of such facilities has, however, been founded on relatively limited knowledge of the reaction of rock masses to cooling. LÄS MER

  7. 5. Thermo-Mechanical-Metallurgical Modelling of Pearlitic Steels and Railhead Repair Welding

    Författare :Björn Andersson; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Pearlitic steels; Railhead repair; Welding simulations; Phase transformations; Cyclic plasticity; Finite element analysis; Homogenisation;

    Sammanfattning : The efficiency of rail transport is attributed to low rolling resistance, which comes at the cost of high contact pressures between rail and wheel. Consequently, both the rail and wheel can be susceptible to fatigue crack initiation and propagation due to the resulting high stresses and large number of load cycles in service. LÄS MER