Sökning: "non-metallic inclusion"

Visar resultat 11 - 15 av 30 avhandlingar innehållade orden non-metallic inclusion.

1. 11. Inclusion Characteristics and Their Link to Tool wear in Metal Cutting of Clean Steels Suitable for Automotive Applications

   Författare :Niclas Ånmark; Andrey Karasev; Pär Göran Jönsson; Thomas Björk; Jinming Zhou; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Tool wear; PCBN; Machinability; Steel; Non-metallic inclusions; Materials Science and Engineering; Teknisk materialvetenskap;

   Sammanfattning : This thesis covers some aspects of hard part turning of carburised steels using a poly‑crystalline cubic boron nitride (PCBN) cutting tool during fine machining. The emphasis is on the influence of the steel cleanliness and the characteristics of non‑metallic inclusions in the workpiece on the active wear mechanisms of the cutting tool. LÄS MER

3. 12. Evaluation of Non-Metallic Inclusions after Deformation and Their Effect on the Machinability of Steel

   Författare :SHUO GUO; Pär Jönsson; Andrey Karasev; Anders Tilliander; Robert Eriksson; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Steel; Heat treatment; REM-treat steel; Ce modification; Chip breakability; weight distribution of chips Non-metallic inclusions; Deformation; Electrolytic extraction; stål; värmebehandling; REM-behandlade stål; Ce modifiering; spånbrytning; viktsdistribution av spån; icke-metalliska inneslutningar; deformation; elektrolytisk extraktion.; Teknisk materialvetenskap; Materials Science and Engineering;

   Sammanfattning : The presence of non-metallic inclusions (NMIs) have critical effects on both the mechanical properties and machinability of steels. In the present thesis, one focus is to study the characteristics of deformed sulfides (MnS) for a stainless steel (3R65) and a tool steel (42CrMo4). LÄS MER

4. 13. Fatigue Anisotropy in Forged Components

   Författare :Cornelius Temmel; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Inclusion Cluster; Low Sulfur; Machinability; Inclusion; Manganese Sulfide; Quenching Crack; Forging; Isotropic Quality; Steel; Anisotropy;

   Sammanfattning : Ever-growing requirements on combustion engine efficiency of motor vehicles demand increasing service loads in powertrain components. Optimization of component material is therefore inevitable. A major detriment with many forged transmission components is their anisotropic mechanical behavior, not least during cyclic loading. LÄS MER

5. 14. ELECTRON BEAM MELTING OF ALLOY 718 - POWDER RECYCLING AND ITS EFFECT ON DEFECT FORMATION

   Författare :Hans Gruber; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; powder recycling; electron beam melting; oxide defects; Alloy 718; defect formation; powder degradation; additive manufacturing; non-metallic inclusions;

   Sammanfattning : As for any production process, the performance of additively manufactured components is ultimately dependent on the quality of the feedstock material. Consequently, for critical components, the feedstock needs to be carefully controlled to assure a stable and reliable quality. LÄS MER

7. 15. A Study on Particle Motion and Deposition Rate : Application in Steel Flows

   Författare :Peiyuan Ni; Pär Jönsson; Lage Jonsson; Mikael Ersson; Stein Tore Johansson; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; steel flow; ladle teeming; continuous casting; non-metallic inclusion behavior; particle deposition; nozzle clogging; numerical simulation.;

   Sammanfattning : Non-metallic inclusions in molten steel have received worldwide attention due to their serious influence on both the steel product quality and the steel production process. These inclusions may come from the de-oxidation process, the re-oxidation by air and/or slag due to an entrainment during steel transfer, and so on. LÄS MER