Sökning: "mekanisk provning"

Visar resultat 1 - 5 av 12 avhandlingar innehållade orden mekanisk provning.

  1. 1. Testing and analysis of composites with 3D woven reinforcement

    Författare :Tomas Ekermann; Malin Åkermo; Stefan Hallström; Lars Pilgaard Mikkelsen; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; 3D weave; finite element; manufacturing; yarn path; weaving; failure criteria; mechanical testing; 3D väv; finita element; tillverkning; trådbanor; vävning; brottkriterier; mekanisk provning; Farkostteknik; Vehicle and Maritime Engineering;

    Sammanfattning : Composites with three-dimensional (3D) reinforcement have several benefits, compared to laminated composites. Their through-thickness reinforcement increase the out-of-plane properties significantly and could eliminate problems with delaminations. Also, these composites have proven to have great damage tolerance and energy absorption. LÄS MER

  3. 2. Discrete element modelling of the mechanical behaviour of lithium-ion battery electrode layers

    Författare :Axel Lundkvist; Per-Lennart Larsson; Pär Jonsén; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Lithium-ion batteries; mechanical characterisation; simulations; contact mechanics; discrete element method; Litiumjonbatterier; mekanisk karakterisering; simuleringar; kontaktmekanik; diskret elementmetod; Teknisk mekanik; Engineering Mechanics; Solid Mechanics; Hållfasthetslära;

    Sammanfattning : Since their introduction in the late 20th century, lithium-ion batteries have become the leading battery technology for portable devices and electric vehicles due to their high energy density and rechargeability. However, the increasing demand for a longer battery life span is hindered by the fading of the battery’s charge capacity over prolonged use. LÄS MER

  4. 3. Anisotropic Mechanical Behaviours and Thin-wall Effects of Additively Manufactured Austenitic Alloys

    Författare :Cheng-Han Yu; Johan Moverare; Ru Lin Peng; Christian Leinenbach; Linköpings universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Laser powder bed fusion; Slow strain rate tensile testing; Short-term creep; Low cycle fatigue; Neutrons; Anisotropy; Crystallographic texture; Microstruc-ture; Dislocation structure; Lasersmältning i pulverbädd; Provning med långsam töjningshastighet; korttidskryp; Lågcykelutmattning; Neutroner; Anisotropi; Kristallografisk textur; Mikrostruktur; Dislokationsstruktur;

    Sammanfattning : Additive manufacturing (AM), also known as 3D printing, is a general concept of building a three-dimensional object layer-by-layer. AM breaks through the manufacturing limitations in conventionally subtractive manufacturing, leading to a great design freedom of components with complex geometries. LÄS MER

  5. 4. On the relation between paperboard properties and packaging performance

    Författare :Gustav Marin; Sören Östlund; Mikael Nygårds; Christer Korin; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Solid Mechanics; Hållfasthetslära;

    Sammanfattning : Paper-based materials, such as paperboard, are commonly used as packaging materials. Inaddition to the advantage that wood as a raw material is renewable, there are also many otherbenefits of paperboard. LÄS MER

  7. 5. Testing and Evaluation of Interfibre Joint Strength under Mixed-Mode Loading

    Författare :Mikael S. Magnusson; Sören Östlund; Lars Wågberg; Mikael Nygårds; Kristofer Gamstedt; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; interfibre joint; fibre-fibre bonding; paper strength;

    Sammanfattning : The failure properties of interfibre bonds are the key for the build-up of strength in fibrous materials such as paper and paperboard. In order to tailor the properties of such materials by chemical or mechanical treatments and to learn how such modifications influence the properties at a microscopic level, direct measurement of individual fibre--fibre crosses are typically performed. LÄS MER