Sökning: "deformation bands"
Visar resultat 16 - 20 av 34 avhandlingar innehållade orden deformation bands.
16. Early structural and metamorphic evolution of the Scandinavian Caledonides: a study of the eclogite-bearing Seve Nappe Complex at the Arctic Circle, Sweden
Sammanfattning : In the Seve Nappe Complex of the Swedish Caledonides, coronitic diabases pass into eclogites; sometimes the transition occurs within one and the same boudin. Calculated pressure-temperature conditions for the eclogite facies stage are 20-27 kbar and 650-750°. LÄS MER
17. Material characterization of AA7075-T651 deformed at different temperatures and strain rates
Sammanfattning : In this licentiate thesis, the mechanical response and the microstructure evolution in aluminum alloy (AA) 7075 in its T651 heat treated state have been studied through mechanical tests at varied conditions of strain rate and temperature.First, compression tests were performed on AA7075-T651 samples at room temperature (RT), 100, 200, 300, 400 and 500 °C (melting temperature of AA7075 is ~635 °C) with two comparatively low strain rates of 0. LÄS MER
18. On Thermomechanical Fatigue of Single-Crystal Superalloys
Sammanfattning : Thanks to their excellent mechanical and chemical properties at temperatures up to 1000 °C, nickel-based superalloys are used in critical components in high-temperature applications such as gas turbines and aero engines. One of the most critical components in a gas turbine is the turbine blade, and to improve the creep and fatigue properties of this component, it is sometimes cast in single-crystal form rather than in the more conventional poly-crystalline form. LÄS MER
19. High-Temperature Behaviour of Austenitic Alloys : Influence of Temperature and Strain Rate on Mechanical Properties and Microstructural Development
Sammanfattning : The global increase in energy consumption and the global warming from greenhouse gas emission creates the need for more environmental friendly energy production processes. Biomass power plants with higher efficiency could generate more energy but also reduce the emission of greenhouse gases, e.g. CO2. LÄS MER
20. Nickel-Based Single-Crystal Superalloys : the crystal orientation influence on high temperature properties
Sammanfattning : Superalloys are a group of materials that are used in high temperature applications, for example gas turbines and aero engines. Gas turbines are most commonly used for power generation, and it is only the very critical components which are exposed to the most severe conditions within the turbine, which are made from superalloy material. LÄS MER
