Sökning: "deformation bands"
Visar resultat 11 - 15 av 34 avhandlingar innehållade orden deformation bands.
11. Deformation induced martensitic transformation of metastable stainless steel AISI 301
Sammanfattning : Metastable stainless steels are promising engineering materials demonstrating good corrosion resistance and mechanical properties. Their mechanical properties are however significantly affected by the deformation induced martensitic transformation. LÄS MER
12. Deformation and Fatigue Behaviour of Porous and Dense Austenitic Stainless Steel
Sammanfattning : PM stainless steels are increasing in use and are expected to do so in the future. A lot of work has been carried out concerning production and sintering of stainless steel powders and on the resulting corrosion behaviour. The deformation behaviour of these materials is less studied. LÄS MER
13. Deformation and failure of hard rock under laboratory and field conditions
Sammanfattning : The understanding of the fracture mechanisms and failure processes of the rock is an important requirement for the design of mining excavations and civil engineering constructions. The fracture process is necessary for the excavation and fragmentation of rock, but fracture of rock must be avoided and controlled to preserve the integrity of the construction. LÄS MER
14. Numerical Modeling of Plasticity in FCC Crystalline Materials Using Discrete Dislocation Dynamics
Sammanfattning : Plasticity in crystalline solids is controlled by the microscopic line defects known as “dislocations”. Decisive role of dislocations in crystal plasticity in addition to fundamentals of plastic deformation are presented in the current thesis work. LÄS MER
15. Fracture behaviour and related microstructures of tool steels parted-off at high rates of strain
Sammanfattning : Increasing steel prices and environmental aspects have put forward the demand to reduce material consumption in manufacturing industry and near-net-shape manufacturing techniques have thus become increasingly important. High-velocity parting-off, or adiabatic cutting, has shown to result in very low material waste as well as narrow dimensional tolerances of parted-off samples. LÄS MER