Sökning: "adiabatic shear band"

Hittade 5 avhandlingar innehållade orden adiabatic shear band.

1. 1. Fracture behaviour and related microstructures of tool steels parted-off at high rates of strain

   Författare :Kristina Ryttberg; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; high-velocity parting-off; adiabatic cutting; high strain-rate deformation; TEM; steel; adiabatic shear band;

   Sammanfattning : Increasing steel prices and environmental aspects have put forward the demand to reduce material consumption in manufacturing industry and near-net-shape manufacturing techniques have thus become increasingly important. High-velocity parting-off, or adiabatic cutting, has shown to result in very low material waste as well as narrow dimensional tolerances of parted-off samples. LÄS MER

3. 2. Microstructural changes in high strength steels exposed to large deformation and high strain rates

   Författare :Kristina Ryttberg; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; deformation mechanisms; high-velocity forming; high-velocity parting-off; adiabatic shear band; cold ring rolling; TEM; steel;

   Sammanfattning : Increasing steel prices and environmental aspects have put forward the demand to reduce material consumption and energy usage in manufacturing industry and near-net-shape manufacturing techniques have thus become increasingly important. High-velocity parting-off,high-velocity forming and cold ring rolling are three such manufacturing methods that exhibit great potentials in terms of material waste reduction. LÄS MER

4. 3. High strain rate deformation of Alloy 718, Influence of Microstructure on Mechanical Properties

   Författare :Joakim Johansson; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Alloy 718; Adiabatic shear localisation; Split-Hopkinson; Johnson-Cook;

   Sammanfattning : Alloy 718 is a high temperature alloy, used where high temperature strength or oxidation resistance is required. As the alloy is precipitate heat treatable, it is possible to have a large variety of deformation and mechanical properties depending on microstructure. LÄS MER

5. 4. Mechanical Properties and Deformation Behaviour of Polymer Materials during Nanosectioning : Characterisation and Modelling

   Författare :Fengzhen Sun; Kristofer Gamstedt; Kai Cheng; Uppsala universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Nanosectioning; Fracture toughness; Adiabatic shearing; Shear band; Nanosectioning; Glassy polymer; Nanocomposite;

   Sammanfattning : Research in local fracture processes and micro-machining of polymers and polymer-based composites has attracted increasing attention, in development of composite materials and miniaturisation of polymer components. In this thesis, sectioning (machining) of a glassy polymer and a carbon nanotube based composite at the nanoscale was performed by an instrumented ultramicrotome. LÄS MER

7. 5. Material characterization of AA7075-T651 deformed at different temperatures and strain rates

   Författare :Biswajit Dalai; Lars-Erik Lindgren; Paul Åkerström; Marta-Lena Antti; Luleå tekniska universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Hållfasthetslära; Solid Mechanics;

   Sammanfattning : In this licentiate thesis, the mechanical response and the microstructure evolution in aluminum alloy (AA) 7075 in its T651 heat treated state have been studied through mechanical tests at varied conditions of strain rate and temperature.First, compression tests were performed on AA7075-T651 samples at room temperature (RT), 100, 200, 300, 400 and 500 °C (melting temperature of AA7075 is ~635 °C) with two comparatively low strain rates of 0. LÄS MER