Sökning: "Thermal spray coating"
Visar resultat 16 - 20 av 20 avhandlingar innehållade orden Thermal spray coating.
16. Microstructure and oxidation behavior of High Velocity Oxy-Fuel spray deposited Ti2AlC coatings
Sammanfattning : Ti2AlC is one of the ternary carbides in the MAX phase group of materials. This group of materials have a unique combination of ceramic and metallic properties, such as machinability, high thermal conductivity, low density and oxidation resistance. LÄS MER
17. Ni-based coatings for high temperature corrosion protection
Sammanfattning : Biomass/waste-fired boilers severely suffer from high temperature corrosion of critical load-bearing components, e.g. water-wall and superheater tubes, due to presence of Cl-containing corrosive species. LÄS MER
18. Corrosion of ferritic stainless steels used in solid oxide fuel cells - Investigation of novel coatings in single- and dual-atmosphere conditions
Sammanfattning : Solid Oxide Fuel Cells (SOFCs) are systems that convert chemical energy into electrical energy. Their high electrical efficiency and clean emissions (when H2 is used as fuel) make them a strong candidate for replacing conventional conversion systems, such as combustion engines. LÄS MER
19. An Experimental Study on Micro-Hydrodynamics of Evaporating/Boiling Liquid Film
Sammanfattning : Study of liquid film dynamics is of significant importance to the understanding and control of various industrial processes that involve spray cooling (condensation), heating (boiling), coating, cleaning and lubrication. For instance, the critical heat flux (CHF) of boiling heat transfer is one of the key parameters ensuring the efficiency and safety of nuclear power plants under both operational and accident conditions, which occurs as the liquid layers (microlayer and macrolayer) near the heater wall lose their integrity. LÄS MER
20. Evaluation of Innovative Rehabilitation Technologies Utilising Polymer Composites for Aging Sewer Systems
Sammanfattning : Water and wastewater sewer system maintenance is among the costliest aspects of infrastructure investment. The replacement of deteriorated lines is a difficult and expensive process that causes community disturbance and is generally not conducted fast enough to meet demand. LÄS MER