Sökning: "KTH jonas"
Visar resultat 41 - 45 av 211 avhandlingar innehållade orden KTH jonas.
41. Molecular Level Studies of the Metal/Atmosphere Interface
Sammanfattning : The chemistry andphysics involved at the metal/atmosphereinterface is interesting both from a fundamental and an appliedperspective. Since iron is the most important of all metalsthis interface is of particular interest. LÄS MER
42. Specifying Safety-Critical Heterogeneous Systems Using Contracts Theory
Sammanfattning : Requirements engineering (RE) is a well-established practice that is also emphasized in safety standards such as IEC 61508 and ISO 26262. Safety standards advocate a particularly stringent RE where requirements must be structured in an hierarchical manner in accordance with the system architecture; at each level, requirements must be allocated to heterogeneous (SW, HW, mechanical, electrical, etc. LÄS MER
43. Regional Geoid Determination Methods for the Era of Satellite Gravimetry : Numerical Investigations Using Synthetic Earth Gravity Models
Sammanfattning : It is the purpose of this thesis to investigate different regional geoid determination methods with respect to their feasibility for use with a future GOCE satellite-only Earth Gravity Model (EGM). This includes investigations of various techniques, which involve different approximations, as well as the expected accuracy. LÄS MER
44. Transport systems meeting long-term climate targets : A backcasting approach
Sammanfattning : Future transport systems consistent with long-term climate targets are examined in this thesis, using a systems perspective covering the entire transport system. Aviation is given particular attention, as expansion of this mode is difficult to reconcile with climate targets. LÄS MER
45. Effect of swirling blade on flow pattern in nozzle for up-hill teeming
Sammanfattning : The fluid flow in the mold during up-hill teeming is of great importance for the quality of the cast ingot and therefore the quality of the final steel products. At the early stage of the filling of an up-hill teeming mold, liquid steel enters, with high velocity, from the runner into the mold and the turbulence on the meniscus could lead to entrainment of mold flux. LÄS MER