Sökning: "Complex Poisson’s ratio"
Visar resultat 1 - 5 av 7 avhandlingar innehållade orden Complex Poisson’s ratio.
1. Identification of Viscoelastic Materials by Use of Wave Propagation Methods
Sammanfattning : Complex moduli and Poisson’s ratio have been estimated using extensional and torsional wave experiments. The data were used for assessment of linearity and isotropy of two polymers, polymethyl methacrylate (PMMA) and polypropylene (PP). The responses of both materials were found to be close to linear and isotropic. LÄS MER
2. Rock Mechanical Consequences of Refrigeration. A Study Based on a Pilot Scale Rock Cavern
Sammanfattning : The deformation of a rock mass due to temperature decrease below freezing is very complex, since many factors are involved; thermal strain, strain due to stress change, stress re-distribution, ice formation and the temperature dependency of rock mechanical and thermo-physical properties. The objective of this study was to achieve a better understanding of the rock mass response to thermo-mechanical loading when storing low temperature products in rock caverns excavated in hard crystalline rock masses. LÄS MER
3. Resonance Testing of Asphalt Concrete
Sammanfattning : This thesis present novel non-destructive laboratory test methods to characterize asphalt concrete. The testing is based on frequency response measurements of specimens where resonance frequencies play a key role to derive material properties such as the complex modulus and complex Poisson’s ratio. LÄS MER
4. Laboratory Seismic Testing of Asphalt Concrete
Sammanfattning : Nondestructive laboratory seismic testing to characterize the complex modulus and Poisson’s ratio of asphalt concrete is presented in this thesis. These material properties are directly related to pavement quality and the dynamic Young’s modulus is used in thickness design of pavements. LÄS MER
5. Effect of Degree of Cure on Viscoelastic Behavior of Polymers and their Composites
Sammanfattning : Reinforced polymer composites consist of continuous fibers embedded in a polymer matrix. The matrix is usually a thermoplastic or thermosetting resin. LÄS MER