Sökning: "Tension-compression tests"

Visar resultat 1 - 5 av 8 avhandlingar innehållade orden Tension-compression tests.

  1. 1. Resonance Testing of Asphalt Concrete

    Författare :Anders Gudmarsson; Nils Rydén; Björn Birgisson; Mihai Marasteanu; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Resonance frequencies; Modal testing; Frequency response functions; Cyclic loading; Tension-compression tests; Complex modulus; Complex Poisson’s ratio;

    Sammanfattning : This thesis present novel non-destructive laboratory test methods to characterize asphalt concrete. The testing is based on frequency response measurements of specimens where resonance frequencies play a key role to derive material properties such as the complex modulus and complex Poisson’s ratio. LÄS MER

  3. 2. Behaviour of fracture process zones in concrete influenced by simultaneously applied normal and shear displacements

    Författare :Manouchehr Hassanzadeh; Avdelningen för Byggnadsmaterial; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; softening; mixed mode; fictitious crack model; concrete; deformationer; betong; brottmekanik; hållfasthet; brotthållfasthet; spänningar; skjuvspänningar; sprickor; beräkningsmodeller; brottenergi; teori; laboratorieförsök; interlock; crack path; diagonal crack; microcracking; instability; fracture energy; fracture mechanics; shear; tension; process zone;

    Sammanfattning : The thesis deals with the determination of the post peak behaviour of concrete in pure tension, and combined tension (compression) and shear. A test arrangement has been developed in order to determine the post peak behaviour of concrete expressed as stress - displacement curves. LÄS MER

  4. 3. Prediction of springback in sheet metal forming

    Författare :Per-Anders Eggertsen; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Hardening law; Bauschinger effect; Springback; FE-simulation; Yield condition; Elastic stiffness degradation;

    Sammanfattning : The prediction of springback is probably the area in sheet metal forming simulation, where the least success has been achieved in terms solution accuracy. The springback is caused by the release of the stresses in the workpiece after the forming stage. LÄS MER

  5. 4. Matrix and interface effects on microcracking in polymer composites

    Författare :Anders Sjögren; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Polymera konstruktionsmaterial; Polymeric Composite Materials;

    Sammanfattning : An underlying industrial problem for the present work is leakage of pressure vessels. Fluid leakage was confirmed to take place along a path of connected microcracks and delaminations. The thesis is concerned with the micromechanisms for microcracking studied by in-situ optical microscopy of cross-ply laminates. LÄS MER

  7. 5. Fatigue damage mechanisms in polymer matrix composites

    Författare :Kristofer Gamstedt; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Polymera konstruktionsmaterial; Polymeric Composite Materials;

    Sammanfattning : Polymer matrix composites are finding increased use in structural applications, in particular for aerospace and automotive purposes. Mechanical fatigue is the most common type of failure of structures in service. The relative importance of fatigue has yet to be reflected in design where static conditions still prevail. LÄS MER