Sökning: "Chris Bales"
Visar resultat 6 - 10 av 15 avhandlingar innehållade orden Chris Bales.
6. Evaluation of Modular Thermally Driven Heat Pump Systems
Sammanfattning : The building sector accounts for approximately 40% of primary energy use within the European Union, therefore reductions in the energy use intensity of this sector are critical in decreasing total energy usage. Given that the majority of energy used within the built environment is for space conditioning and domestic hot water preparation, prudence would suggest that decreasing primary energy used for these end purposes would have the biggest overall environmental impact. LÄS MER
7. Energy efficient and economic renovation of residential buildings with low-temperature heating and air heat recovery
Sammanfattning : With the building sector accounting for around 40% of the total energy consumption in the EU, energy efficiency in buildings is and continues to be an important issue. Great progress has been made in reducing the energy consumption in new buildings, but the large stock of existing buildings with poor energy performance is probably an even more crucial area of focus. LÄS MER
8. Energy Efficient Renovation Strategies for Swedish and Other European Residential and Office Buildings
Sammanfattning : The high energy use in the European building stock is attributable to the large share of old buildings with poor energy performance. Energy renovation of buildings is therefore vital in the work towards energy efficiency and reduced environmental impact in the EU. LÄS MER
9. Energy Efficiency through Thermal Energy Storage : Possibilities for the Swedish Building Stock
Sammanfattning : The need for heating and cooling in buildings constitutes a considerable part of the total energy use in a country and reducing this need is of outmost importance in order to reach national and international goals for reducing energy use and emissions. One important way of reaching these goals is to increase the proportion of renewable energy used for heating and cooling of buildings. LÄS MER
10. Characterization of Chimney Flue Gas Flows : Flow Rate Measurements with Averaging Pitot Probes
Sammanfattning : Performance testing methods of boilers in transient operating conditions (start, stop and combustion power modulation sequences) need the combustion rate quantified to allow for the emissions to be quantified. One way of quantifying the combustion rate of a boiler during transient operating conditions is by measuring the flue gas flow rate. LÄS MER
