Sökning: "thermo-mechanical fatigue"

Visar resultat 26 - 29 av 29 avhandlingar innehållade orden thermo-mechanical fatigue.

  1. 26. Modeling of phase transformations and cyclic plasticity in pearlitic steels

    Författare :Björn Andersson; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Phase transformations; TRIP; Pearlitic steel; FEM; Cyclic plasticity; Homogenization;

    Sammanfattning : The low rolling resistance in railway transportation is a key factor for its high efficiency, but it comes at the price of very high contact pressure between the rail and wheel. Due to the high stresses and the large number of load cycles during railway operation, both the rail and the wheel can be susceptible to fatigue crack initiation and propagation. LÄS MER

  3. 27. Damage mechanics analysis of inelastic behaviour of fiber composites

    Författare :Peter Lundmark; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Polymera konstruktionsmaterial; Polymeric Composite Materials;

    Sammanfattning : Composite laminates under service loading undergo complex combinations of thermal and mechanical loading, leading to microdamage accumulation in the plies. The first mode of damage is usually intralaminar cracking with the crack plane transverse to the laminate middle-plane, spanning the whole width of the specimen. LÄS MER

  4. 28. Mechanism-based flow stress model for Ti-6Al-4V : applicable for simulation of additive manufacturing and machining

    Författare :Bijish Babu; Lars-Erik Lindgren; Jean-Philippe Ponthot; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Material modeling; Ti-6Al-4V; dislocation density; vacancy concentration; additive manufacturing; hot forming; heat treatment; Material Mechanics; Materialmekanik;

    Sammanfattning : Ti-6Al-4V has remarkable properties such as high specific mechanical properties (viz. stiffness, strength, toughness, fatigue resistance), corrosion resistance, biocompatibility etc. These properties make it attractive for applications in aerospace, chemical industry, energy production, surgical implants, etc. LÄS MER

  5. 29. Simulation of additive manufacturing using a mechanism based plasticity model

    Författare :Andreas Malmelöv; Andreas Lundbäck; Mathias Wallin; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Residual stress; Material model; Alloy 625; Alloy 718; deformations; Finite Element Method; synchrotron X-ray diffraction; Solid Mechanics; Hållfasthetslära;

    Sammanfattning : This thesis presents finite element (FE) simulations of additive manufacturing (AM) and physically based material modeling of alloy 625 and alloy 718. In recent years, there has been an increasing interest in AM and there has been a dramatic increase in publications in the field. LÄS MER