Sökning: "thermal resistance"

Visar resultat 41 - 45 av 363 avhandlingar innehållade orden thermal resistance.

1. 41. Moisture Conditions and Frost Resistance of Concrete in Hydraulic Structures

   Författare :Martin Rosenqvist; Avdelningen för Byggnadsmaterial; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Hydraulic Structures; Hydro Power; Concrete Dams; Concrete; Frost Resistance; Scaling; Spalling; Moisture Absorption; Macroscopic Ice Lens Growth;

   Sammanfattning : Owing to the winter conditions in Sweden, the effects of frost action may have a considerable impact on the deterioration of concrete. Both superficial and internal damage, which are suspected to have been caused by frost action, have been found in concrete in hydraulic structures. LÄS MER

3. 42. On the Microstructure and the Thermal Conductivity in Compacted Graphite Iron

   Författare :Martin Selin; Ingvar L. Svensson; Daniel Holmgren; Lars Nyborg; Kenneth Hamberg; Jönköping University; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Compacted graphite iron; Microstructure; Thermal conductivity; Ferrite; Cementite; Nodularity; Mathematical modelling; Laser flash technique; Austempering;

   Sammanfattning : Compacted graphite iron (CGI) is a cast iron material that has gained much attention due to its attractive material properties which are intermediate between those of grey and ductile cast iron. In the automotive industry compacted graphite iron has become an interesting alternative material to grey cast iron in components like cylinder blocks or cylinder heads. LÄS MER

4. 43. Numerical and Experimental Investigations on Aerodynamic and Thermal Aspects of Rotating Wheels

   Författare :Alexey Vdovin; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; ventilation resistance; wind tunnel; brake cooling; ride height; aerodynamic moment; CFD; rim design; vehicle aerodynamics;

   Sammanfattning : With todays and future environmental legislations for CO2 and other emission gases, all vehicle manufacturers are forced to further develop tools and methods to make their vehicles more energy efficient and environmentally friendly. One option to achieve this is to reduce the aerodynamic resistance since it has a significant influence on the vehicle fuel consumption, especially for velocities higher than 50 km/h. LÄS MER

5. 44. Condensation and frost formation in fibrous thermal-insulation materials

   Författare :Tomáš Vrána; Folke Björk; Ove Söderström; Kjartan Gudmundsson; Carsten Rode; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Fibrous thermal insulation; Stone wool; Cellulose; MAterial properties; Moisture transport; Condensation; Frost formation; Exterior conditions; Interior conditions; Civil engineering and architecture; Samhällsbyggnadsteknik och arkitektur; Construction materials; Konstruktionsmaterial;

   Sammanfattning : Heavily insulated constructions are at present being used to strike at the vast energy consumption in residential buildings and commercial alike. They introduce a high-thickness layer of thermal insulation in the building envelopes. LÄS MER

7. 45. Erosion - Corrosion Resistance and Adhesion of Laser and Thermally Deposited Coatings in Fluidised Beds

   Författare :Anders Hjörnhede; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; coating; fluidised bed; HVOF; laser cladding; CFB; FBC; adhesion testing; PFBC; thermal spraying; arc spray; erosion - corrosion; acoustic emission;

   Sammanfattning : High temperature erosion - corrosion is the major source for degradation of components such as heat exchangers, tubes, cyclones and water walls used in Fluidised Bed Combustion (FBC) plants. By coating the exposed components with a protective material, the degradation rate can be decreased. LÄS MER