Sökning: "Nodularity"

Visar resultat 1 - 5 av 16 avhandlingar innehållade ordet Nodularity.

  1. 1. Investigation on the Influence of Nodularity in Machining of Compacted Graphite Iron (CGI)

    Författare :Gustav Grenmyr; Chalmers University of Technology; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Compacted Graphite Iron CGI ; cutting forces; wear mechanisms; tool wear; nodularity; tool temperature; cutting temperature;

    Sammanfattning : Stringency of environmental legislation on emission rates and increasing vehicle performance requirements are pushing the automotive and heavy truck industries to find new solutions for their diesel engines. Two potential opportunities to address these challenges involve increased combustion pressure to obtain more efficient combustion or reducing the weight of the engine. LÄS MER

  2. 2. On the Microstructure and the Thermal Conductivity in Compacted Graphite Iron

    Författare :Martin Selin; Ingvar L. Svensson; Daniel Holmgren; Lars Nyborg; Kenneth Hamberg; Högskolan i Jönköping; []
    Nyckelord :Compacted graphite iron; Microstructure; Thermal conductivity; Ferrite; Cementite; Nodularity; Mathematical modelling; Laser flash technique; Austempering;

    Sammanfattning : Compacted graphite iron (CGI) is a cast iron material that has gained much attention due to its attractive material properties which are intermediate between those of grey and ductile cast iron. In the automotive industry compacted graphite iron has become an interesting alternative material to grey cast iron in components like cylinder blocks or cylinder heads. LÄS MER

  3. 3. On the Microstructure and the Thermal Conductivity in Compacted Graphite Iron

    Författare :Martin Selin; Chalmers University of Technology; []
    Nyckelord :Cementite; Austempering; Thermal conductivity; Nodularity; Ferrite; Microstructure; Compacted graphite iron; Laser flash technique; Mathematical modelling;

    Sammanfattning : Compacted graphite iron (CGI) is a cast iron material that has gained much attention due to its attractive material properties which are intermediate between those of grey and ductile cast iron. In the automotive industry compacted graphite iron has become an interesting alternative material to grey cast iron in components like cylinder blocks or cylinder heads. LÄS MER

  4. 4. Morphological characterization of primary austenite in cast iron

    Författare :Juan Carlos Hernando; Attila Diószegi; Högskolan i Jönköping; []
    Nyckelord :ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Lamellar Graphite Iron; Solidification; Primary Austenite; Microstructure Evolution; Dendritic coarsening; Compacted Graphite Iron; Magnesium Fading; Nodularity;

    Sammanfattning : Automotive industry products portfolio includes a wide variety of complex‐shaped cast iron products, such as truck engine components, that need to withstand a constant trend of higher demands, especially urged by stricter environmental regulations on emissions. Combined with this continued demand on properties improvement, cast iron industry faces a process problem related to the lack of understanding of solidification and mechanisms behind defect formation. LÄS MER

  5. 5. The influence of graphite morphology on the elastic behaviour of cast irons

    Författare :Torsten Sjögren; Linköpings universitet; []
    Nyckelord :Cast iron; flake graphite; compacted graphite; spheroidal graphite; elastic behaviour; modulus of elasticity; graphite modulus of elasticity; nodularity; aspect ratio; plastic deformation; acoustic emission; TECHNOLOGY; TEKNIKVETENSKAP;

    Sammanfattning : The morphology of the graphite phase largely controls the resulting properties of different grades of cast iron. In flake graphite cast irons, the mechanical properties are low while the thermal conductivity is high. In contrast, with spheroidal graphite cast irons, the mechanical properties are high while the thermal conductivity is low. LÄS MER