Sökning: "scanning electron microscope"

Visar resultat 31 - 35 av 113 avhandlingar innehållade orden scanning electron microscope.

  1. 31. Scanning probe microscopy studies of interaction forces between particles: emphasis on magnetite, bentonite and silica

    Författare :Illia Dobryden; Neil Thomson; Luleå tekniska universitet; []
    Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; Experimentell fysik; Experimental Physics;

    Sammanfattning : Scanning probe microscopy (SPM), such as the atomic force microscope (AFM), using colloidal probes is a highly suitable technique to probe single particle-particle interactions in aqueous solution. The interaction force between a colloidal probe on the AFM cantilever and sample surface is measured. LÄS MER

  3. 32. Nanomechanics – Quantum Size Effects, Contacts, and Triboelectricity

    Författare :Martin Olsen; Jonas Örtegren; Håkan Olin; Per Gradin; Peter Glans; Rusen Yang; Mittuniversitetet; []
    Nyckelord :triboelectricity; adatom; ion; charge; mound; quantum size effect; triboelctric nanogenerator; TENG; wind driven; contact; nanomechanics; fri electron model; nanowire cantilever;

    Sammanfattning : Nanomechanics is different from the mechanics that we experience in everyday life. At the nano-scale, typically defined as 1 to 100 nanometers, some phenomena are of crucial importance, while the same phenomena can be completely neglected on a larger scale. LÄS MER

  4. 33. Thermo-mechanical Fatigue Crack Propagation in Inconel 718

    Författare :Lars Jacobsson; Materialteknik; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; crack closure; image analysis; potential drop; in-situ scanning elecron microscopy; crack propagation experiments; Thermo-mechanical fatigue; Inconel 718;

    Sammanfattning : Thermo-mechanical fatigue crack propagation in Inconel 718 has been studied with different methods. In-situ observations with a scanning electron microscope (SEM) were performed, the crack propagation process was followed cycle by cycle and the influences from load, temperature, and microstructure on the crack growth were analyzed. LÄS MER

  5. 34. The influence of microstructure on the crack initiation and propagation in Al-Si casting alloys

    Författare :Toni Bogdanoff; Salem Seifeddine; Ehsan Ghassemali; Anders E.W. Jarfors; Johan Moverare; Jönköping University; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Aluminum-Silicon alloys; scanning electron microscopy; material characterization; fatigue performance; digital image correlation;

    Sammanfattning : For reducing the CO2 footprint in many industrial fields, the goal is to produce lighter components. The aluminium-silicon (Al-Si) cast alloys are promising candidates to fulfill these goals with a high weight-to-strength ratio, good corrosion properties, excellent castability, and recyclable material. LÄS MER

  7. 35. Microstructure and Inclusion Characteristics in Steels with Ti-oxide and TiN Additions

    Författare :Wangzhong Mu; Pär Jönsson; Keiji Nakajima; Casper Van der Eijk; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; intragranular ferrite; oxide metallurgy; inclusion engineering; titanium nitride; titanium oxide; inclusion size; heterogeneous nucleation; critical diameter; confocal laser scanning microscopy CLSM ; differential scanning calorimetry DSC ; continuous cooling transformation CCT diagram.; Materials Science and Engineering; Teknisk materialvetenskap;

    Sammanfattning : Non-metallic inclusions in steels are generally considered to be detrimental for mechanical properties. However, it has been recognized that certain inclusions, such as Ti-oxide and TiN, can serve as potent nucleation sites for the formation of intragranular ferrite (IGF) in low-alloy steels. LÄS MER