Sökning: "plane state stress"
Visar resultat 6 - 10 av 31 avhandlingar innehållade orden plane state stress.
6. On fracture of layered materials
Sammanfattning : This thesis is concerned with fracture in layered bimaterials. Fracture of coatings is considered to some extent. The behaviour of cracks growing normal to bimaterial interfaces is studied with the objective to clarify conditions for crack-tip shielding and amplification. LÄS MER
7. Initiation and early crack growth in VHCF of stainless steels : Experimental and theoretical analysis
Sammanfattning : Mechanical fatigue is a failure phenomenon that occurs due to repeated application of mechanical loads. Very High Cycle Fatigue (VHCF) is considered as the domain of fatigue life greater than 10 million load cycles. LÄS MER
8. High strain-rate experiments using high-speed photography
Sammanfattning : In many technical processes, material is deformed under conditions that contain high strain rates. Examples of such processes are collisions, impact, penetration, metal forming and crack propagation. Constitutive models including viscoplasticity have been proposed for these kinds of situations. LÄS MER
9. Weakening of Crack-tip Singularity due to Buckling of Thin Bodies under Tension
Sammanfattning : When thin sheets containing a crack is subjected to tensile loading in the direction perpendicular to the crack surface out of plane displacement will occur in areas surrounding the crack. By this the stress state in the vicinity of the crack tip is changed and leads to a weaker crack tip singularity than the r-1/2 by linear elastic fracture mechanics. LÄS MER
10. Carbon Effect on Mechanical Properties in Austenitic Steels - A DFT-based Study
Sammanfattning : To study the effect of carbon interstitials in austenitic steels on plastic deformation mechanisms is the main goal of the present thesis. Using first-principlesmethods, the generalized stacking fault energy (GSFE) of C-alloyed γ-Fe is firstcalculated. The GSFE curve includes several prominent stacking fault energiesthat are fundamental for, e. LÄS MER