Sökning: "number of degrees of freedom"

Visar resultat 16 - 20 av 81 avhandlingar innehållade orden number of degrees of freedom.

1. 16. Numerical Techniques for Acoustic Modelling and Design of Brass Wind Instruments

   Författare :Daniel Noreland; Bertil Gustafsson; Leif Abrahamsson; Björn Sjögreen; Uppsala universitet; []
   Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; Acoustic horn; brass wind instrument; loudspeaker; optimization; hybrid method; Numerical Analysis; Numerisk analys;

   Sammanfattning : Acoustic horns are used in musical instruments and loudspeakers in order to provide an impedance match between an acoustic source and the surrounding air. The aim of this study is to develop numerical tools for the analysis and optimisation of such horns, with respect to their input impedance spectra. LÄS MER

3. 17. Simulation and Experimental Methods for Characterization of Nonlinear Mechanical Systems

   Författare :Martin Magnevall; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; nonlinear structural dynamics; simulation; system characterization; experimental techniques; experimental methods;

   Sammanfattning : Trial and error and the use of highly time-consuming methods are often necessary for investigation and characterization of nonlinear systems. However, for the rather common case where a nonlinear system has linear relations between many of its degrees of freedom there are opportunities for more efficient approaches. LÄS MER

4. 18. Design and optimization of parallel haptic devices : Design methodology and experimental evaluation

   Författare :Suleman Khan; Kjell Andersson; Jan Wikander; Ölvander Johan; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Medical simulation; 6-DOF haptic devices; design methodology.; SRA - ICT; SRA - Informations- och kommunikationsteknik;

   Sammanfattning : The simulation of surgical procedures, in the case of hard tissues such as bone or teeth milling, using a haptic milling surgery simulator requires a haptic device which can provide high stiffness and transparency. To mimic a real milling process of hard tissue, such as for example creating a narrow channel or cavity, the simulator needs to provide force/torque feedback in 5–6 degrees of freedom (DOF). LÄS MER

5. 19. Model-Based Optimization of Combustion-Engine Control

   Författare :Gabriel Turesson; Institutionen för reglerteknik; []
   Nyckelord :Model Predictive Control MPC ; Partially Premixed Combustion; Pressure Sensor Feedback; Model Based Control; Particle Filter; Multiple Fuel Injections; Gasoline Compression Ignition; Model Predictive Control MPC ; Partially Premixed Combustion PPC ; Low Temperature Combustion; Model Based Control; Multiple Fuel Injections; Pressure Sensor Feedback; Particle Filter; Gasoline Compression Ignition;

   Sammanfattning : The work presented in this thesis is motivated by the need to reliably operate a compression-ignition engine in a partially premixed combustion (PPC) mode. Partially premixed combustion is a low temperature combustion concept, where the ignition delay is prolonged to enhance fuel-air mixing in the combustion chamber before the start of combustion. LÄS MER

7. 20. Design and Stability of Cu(In,Ga)Se2-Based Solar Cell Modules

   Författare :Johan Wennerberg; Michael Powalla; Uppsala universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Electronics; Thin film solar cells; CIGS; Cu In; Ga Se2; stability; lifetime; testing; Elektronik; Electronics; Elektronik; Elektronik; Electronics;

   Sammanfattning : Cu(In,Ga)Se2 (CIGS) is one of the most promising semiconductor compounds for large-scale production of efficient, low-cost thin film solar cells, and several research institutes have announced their plans for CIGS production lines. But for the CIGS technology to become a commercial success, a number of issues concerning manufacturability, product definition, and long-term stability require further attention. LÄS MER