Sökning: "interlaminar"

Visar resultat 6 - 10 av 17 avhandlingar innehållade ordet interlaminar.

  1. 6. Development of the inclined double notch shear test for determination of interlaminar properties of composite laminates

    Författare :Kaj Pettersson; KTH; []
    Nyckelord :;

    Sammanfattning : .... LÄS MER

  3. 7. Stress-laminated-timber bridge decks subjected to ultimate loads

    Författare :Kristoffer K J Ekholm; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Ultimate-load tests; Stress-laminated timber; Timber bridges;

    Sammanfattning : Stress-laminated-timber (SLT) bridge decks are a satisfactory alternative to conventional short-span bridges in terms of cost and performance. SLT decks are made from several deck laminations positioned side by side. LÄS MER

  4. 8. Deformability of unidirectional prepreg materials

    Författare :Ylva Larberg; Malin Åkermo; Patrik Fernberg; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; prepreg; deformability; carbon composite; Vehicle engineering; Farkostteknik;

    Sammanfattning :  To reduce cost of structural composites the development of more efficient manufacturing methods is of great interest. Sheet forming of thermoset prepreg, also known as hot drape forming, has been a promising manufacturing method for decades. An automatic tape layer (ATL) can be used to perform the lay-up in an efficient way. LÄS MER

  5. 9. Modelling of Delamination Growth in Composite Structures

    Författare :Niklas E. Jansson; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; large deformation; interface; composite materials; 3D-shell; cohesive zone; regularization; shell element; delamination;

    Sammanfattning : Delaminations constitute an important damage and failure mode in polymeric composite laminates. In order to explicitly incorporate and model the delamination progression within a finite element analysis, the meso-modelling concept is applied in the present work. The laminate is thereby represented by separate layers connected with interfaces. LÄS MER

  7. 10. Experimental methods to determine model parameters for failure modes of CFRP

    Författare :Daniel Svensson; Ulf Stigh; Svante Alfredsson; Högskolan i Skövde; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; composite; delamination; compressive failure; energy release rate; cohesive modelling; Teknik; Technology;

    Sammanfattning : The focus of this thesis is to develop methods to predict the damage response of Carbon Fibre Reinforced Polymers (CFRP). In the pursuit of reducing the manufacturing cost and weight of CFRP components, it is crucial to enable modelling of the non-linear response associated with various failure modes. LÄS MER