Sökning: "freeness"

Visar resultat 6 - 10 av 12 avhandlingar innehållade ordet freeness.

1. 6. Chemometric and signal processing methods for real time monitoring and modeling : applications in the pulp and paper industry

   Författare :Anders Björk; Lars-Göran Danielsson; Guy Dumont; KTH; []
   Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; Acoustic; Vibration; Multivariate; Chemometrics; PLS; OSC; PCA; FFT; Wavelets; WT-MRS; CWT-FLE; Pulp Quality; CSF; Brightness; Tensile Strength properties; Optical Properties; Measurement Technology; On-line; Non-invasive; Process Control; Process Analysis; Process Analytical Technology; PAT.; Akustik; Vibrationer; Multivariat; Kemometri; PLS; OSC; PCA; FFT; Wavelets; WT-MRS; CWT-FLE; Massakvalitet; CSF; Ljushet; Dragstyrkeegenskaper; Optiska egenskaper; Mätteknik; On-line; Icke berörande mätning; Processtyrning; Processanalys; Processanalytisk Teknologi; PAT.; Analytical chemistry; Analytisk kemi;

   Sammanfattning : In the production of paper, the quality of the pulp is an important factor both for the productivity and for the final quality. Reliable real-time measurements of pulp quality are therefore needed. LÄS MER

3. 7. Mechanical Pulp. Effects of Pretreatment and Wood Source on Fiber Separation and Pulp Properties

   Författare :Lars Johansson; Chalmers tekniska högskola; []
   Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; torsional stress; pulp properties; chips; impregnation; screw press; SEM; mechanical pulp; sulfonation; shear stress; fracture surface; wood quality; temperature;

   Sammanfattning : The work presented in this thesis concerns the mechanical pulping process and the effects of wood source and pretreatment conditions on the pulp properties. In the first part, the deformation of Norway spruce (Picea abies) wood samples was investigated under shear and torsional loading at different temperatures (20-95°C) and sulfonation conditions. LÄS MER

4. 8. Quality Control of a Newsprint TMP Refining Process based on Refining Zone Temperature Measurements

   Författare :David Sikter; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; temperature profile; quality control; usability; economy; TMP refining;

   Sammanfattning : The ultimate goal of this study was to examine the possibility of using temperature measurements for control purposes in a TMP refining process. The study was carried out in a commercial refiner line at Holmen Paper’s Hallsta Mill, were the primary stage refiner was equipped with temperature sensors. LÄS MER

5. 9. Reduction of refining energy during mechanical pulping : using pressurised chip compression and sulphite pre-treatment

   Författare :Erik Nelsson; Geoffrey Daniel; Mittuniversitetet; Sveriges lantbruksuniversitet; []
   Nyckelord :LANTBRUKSVETENSKAPER; AGRICULTURAL SCIENCES; Chip pre-treatment; double disc refiner; energy efficiency; Impressafiner; low dosage; Norway spruce; refining intensity; single disc refiner; sulphite pre-treatment; thermomechanical pulp;

   Sammanfattning : The effects of pressurised compressive chip pre-treatment and low dosage sulphite pre-treatment were evaluated for production of thermomechanical pulp in mill scale trials using Norway spruce (Picea abies) at the Braviken paper mill (Holmen Paper AB, Sweden). The general aim of the study was to improve the energy efficiency during the production of mechanical pulps suitable for news and improved news grade papers. LÄS MER

7. 10. Low consistency refining of mechanical pulp : process conditions and energy efficiency

   Författare :Stefan Andersson; Per Engstrand; Christer Sandberg; Mittuniversitetet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Mechanical pulping; low consistency refining; energy efficiency; rotor position; plate gap; fibre concentration;

   Sammanfattning : The thesis is focussed on low consistency (LC) refining of mechanical pulp. Theresearch included evaluations of energy efficiency, development of pulpproperties, the influence of fibre concentration on LC refining and effects of rotorposition in a two-zoned LC refiner. LÄS MER