Sökning: "crack growth"
Visar resultat 6 - 10 av 184 avhandlingar innehållade orden crack growth.
6. Initiation and early crack growth in VHCF of stainless steels : Experimental and theoretical analysis
Sammanfattning : Mechanical fatigue is a failure phenomenon that occurs due to repeated application of mechanical loads. Very High Cycle Fatigue (VHCF) is considered as the domain of fatigue life greater than 10 million load cycles. LÄS MER
7. Engineering aspects of fatigue crack growth in metal
Sammanfattning : .... LÄS MER
8. Modelling of TMF Crack Growth in Polycrystalline Gas Turbine Alloys : Accounting for Crack Closure Effects
Sammanfattning : The main objective of the work presented in this Licentiate of Engineering thesis is to investigate and model the fatigue crack propagation behaviour of the nickel-based superalloy Inconel 792, with special attention to the industrial lifing of high-temperature components. In-phase (IP) crack propagation tests have been performed at different temperatures and loading regimes, including extended hold times. LÄS MER
9. Failure of thermal barrier coatings under thermal and mechanical fatigue loading : microstructural observations and modelling aspects
Sammanfattning : Industrial and air-borne gas turbine hot components suffer from creep, oxidation, corrosion and microstructural degradation if not shielded from the hot and aggressive combustion gases. Two major strategies commercially available are adopted; film cooling by pressurised air and application of protective coatings. LÄS MER
10. Numerical Modelling of Short Fatigue Crack Growth
Sammanfattning : Fatigue implies repeated loading and unloading of a structure, and components subjected to fatigue might experience nucleation of cracks, and subsequent crack propagation. This might lead to catastrophic consequences, such as complete failure of a structure. LÄS MER