Sökning: "convective heat transfer"

Visar resultat 21 - 25 av 61 avhandlingar innehållade orden convective heat transfer.

1. 21. Numerical Simulation of Some Heat Transfer and Fluid Flow Phenomena for Gas Turbine Blades and a Transonic Turbine Stage

   Författare :Fadil Mumic; Värmeöverföring; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; fluiddynamik; plasma; Thermal engineering; applied thermodynamics; plasmas; Gaser; fluid dynamics; Gases; transonic; numerical; heat transfer coefficient; shroud surface; squealer blade tip; flat blade tip; leakage flow; Termisk teknik; termodynamik; turbulence modeling;

   Sammanfattning : With the attempts to achieve higher thermal efficiency, turbine blades are exposed to very high temperature gases and may undergo severe thermal stress and fatigue. Thus, in order to develop optimal cooling strategies and reduce the heat transfer it is important to obtain a good understanding of both the complex flow field and the heat transfer characteristics in turbine rotor/stator hot-gas passages. LÄS MER

3. 22. An Analytical Solution Applied to Heat and Mass Transfer in a Vibrated Fluidised Bed Dryer

   Författare :Apolinar Picado; Joaquín Martínez; Göran Lindbergh; Ivars Neretnieks; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Analytical solution; Heat and mass transfer; Temperature and moisture distribution; Drying modelling; Multicomponent drying; Drying selectivity; Volatile retention; Ternary mixture; Drying of particulate materials; Vibrated fluidised bed dryer; Chemical engineering; Kemiteknik;

   Sammanfattning : A mathematical model for the drying of particulate solids in a continuous vibrated fluidised bed dryer was developed and applied to the drying of grain wetted with a single liquid and porous particles containing multicomponent liquid mixtures. Simple equipment and material models were applied to describe the process. LÄS MER

4. 23. Mathematical Analysis of Forced Convective Flow Due to Stretching Sheet and Instabilities of Natural Convective Flow

   Författare :Prashant G Metri; Sergei Silvestrov; Rebei Bel-Fdhila; Mälardalens högskola; []
   Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; Boundary layer theory; Heat and Mass transfer; Partial differential equations; Stretching sheet; Mathematics Applied Mathematics; matematik tillämpad matematik;

   Sammanfattning : The investigations presented in the thesis are theoretical studies of magnetohydrodynamic flows, heat and mass transfer in Newtonian/non-Newtonian cooling liquids, due to horizontal/vertical stretching sheet. The theoretical studies include the effect of magnetic field, uniform and non-uniform heat source/sink (flow and temperature dependent heat source/sink) effects. LÄS MER

5. 24. Thermal response tests : influence of convective flow in groundwater filled borehole heat exchanger

   Författare :Anna-Maria Gustafsson; Jeffrey D. Spitler; Luleå tekniska universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Vattenteknik; Water Resources Engineering; VA-teknik; Urban Water Engineering;

   Sammanfattning : The main objective of this doctorial thesis was to investigate how thermally induced movements in the groundwater (natural convective flow) may influence the heat transport in borehole and surrounding bedrock in a groundwater filled borehole heat exchanger system. The purpose was also to determine if thermal response tests could be used to detect the convective influence and the effect on evaluated heat transfer parameters, effective bedrock thermal conductivity and borehole thermal resistance. LÄS MER

7. 25. Large Eddy Simulation of Impinging Jets

   Författare :Thomas Hällqvist; Laszlo Fuchs; Pierre Sagaut; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Impinging jet; large eddy simulation; heat transfer; vortex formation; circular jet; forcing; inflow conditions; implicit modeling.; Fluid mechanics; Strömningsmekanik;

   Sammanfattning : This thesis deals with Large Eddy Simulation (LES) of impinging air jets. The impinging jet configuration features heated circular jets impinging onto a flat plate. The problem addressed here is of generic nature, with applications in many engineering devices, such as cooling of components in gas turbines, in cars and electronic devices. LÄS MER